551200
150
Zoom out
Zoom in
Previous page
1/187
Next page
13. INSTALLATION
13-16
GPS antenna unit (option)
Connect the antenna cable to the GPS connector.
How to attach the M-P-8DFB connector
How to waterproof the connector
Wrap the connector with vulca-
nizing tape and then vinyl tape.
Bind the tape ends with cable-
ties.
Outer sheath
Armor
Dimensions in millimeters.
Inner sheath Shield
Remove outer sheath and armor by the dimensions shown left.
Expose inner sheath and shield by the dimensions shown left.
Cut off insulator and conductor by 10mm.
Twist shield end.
Ship on clamp nut, gasket and clamp as shown left.
Fold back shield over clamp and trim.
Cut aluminum foil at four places, 90º from one another.
Fold back aluminum foil onto shield and trim.
Expose the insulator by 1 mm.
Expose the core by 5 mm.
Slip the pin onto the conductor. Solder them together through
the hole on the pin.
Insert the pin into the shell. Screw the clamp nut into the shell.
(Tighten by turning the clamp nut. Do not tighten by turning
the shell.)
Cover with heat-shrink tubing and heat.
30
10
Clamp nut
Gasket
(reddish
brown)
Clamp
Aluminum foil
Trim shield here.
Trim aluminum tape foil here.
Insulator
1
5
Clamp nut
Pin
Shell
Solder through the hole.
50
30
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP-1870F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP-1870F in the language / languages: English as an attachment in your email.

The manual is 23,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno GP-1870F

Furuno GP-1870F Installation Guide - English - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info