522141
26
Zoom out
Zoom in
Previous page
1/91
Next page
2-4
Note1: How to connect cable to the terminal board.
1. Press this downward by finger or screw driver.
2. Insert a core of cable.
3. Release the finger or screw driver.
Control unit
Connect the transceiver unit and the control unit by the supplied cable with D-sub 15 pin
connector for both ends. The control unit connected to the CONTROLLER 1 port has
priority.
Connect the handset HS-2001 to the HANDSET 1 port at the rear of the control unit. For
other handset or microphone, connect to the HANDSET2/MIC port. Note that these two
ports can not be used at the same time.
Antennas
The antenna for DSC distress (mandatory) and DSC routine frequency (option for FS-2570
only) are connected to the transceiver unit with a 50 ohm coaxial cable, type RG-8/U or
equivalent. Be sure to leave some slack in the cable for future service and maintenance.
Lay the coaxial cable and attach an M-type plug to the cable as follows.
1. Remove the sheath by 30 mm.
2. Bare 23 mm of the center conductor. Trim braided shield by 5 mm and tin.
3. Slide coupling ring onto cable.
4. Screw the plug assembly on the cable.
5. Solder plug assembly to braided shield through solder holes. Solder contact sleeve to
conductor.
6. Screw coupling ring into plug assembly.
7. Screw the plug into the D. ANT (W/R 1) port for DSC distress and ANT (W/R 2 port) for
DSC routine frequency (option) at the bottom of the transceiver unit.
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-2570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-2570 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FS-2570

Furuno FS-2570 User Manual - English - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info