522141
25
Zoom out
Zoom in
Previous page
1/91
Next page
2-3
2.1.2 Connection on the transceiver unit
Power cable
Cut the rubber bush to the form of cross with knife.
Pass the power cable (supplied) through the hole at the bottom of the transducer unit, and
fasten it to the TB1 and 2. Fasten it to the fixing plate at cable entrance with a cable tie
(local supply.) When connecting to the optional AC-DC power supply unit PR-300 (FS-1570)
or 850A (FS-2570), supply AC power and DC power to the PR-300/850A. See paragraph
“2.3 Connection of AC-DC Power Supply Unit” for detail.
Antenna coupler cable
Cut the rubber bush to the form of cross with knife.
Cut the connector of the signal cable (05S0949) off, pass the cable to the rubber bush, and
then connect the cable to TB5 on the T-IF Board (05P0731) (See Note 1.). Wrap vinyl tape
or attach an insulating tube to the shield wire to prevent the shorting to the board. Fasten
the signal cable to the fixing plate with a cable tie (local supply.)
Attach the M-type connector of the coaxial cable 05S0462, from the antenna coupler) to T/R
ANT port. Note that when running the coaxial cable, attach it with slack for opening/closing
the lid.
9
10 111213 141516
12345678
171819 2021222324
252627282930 3132
COUPLER
05P0731
TB1(+) TB2(-)
T-IF Board (FS-1570)
1
TB5
2
3
4
5
6
7
I ANT
TUNE OK
THROUGH
TUNE
DUMMY
+ 15V
0V
SHIELD
YEL
GRN
WHT
BLK
RED
ORG
BRW
8
Cable from Antenna Coupler
9 mm
FV5.5-4
YELLOW 2 pcs.
05S0949
05S0462
DPYC-6 (FS-1570) or
DPYC-10 (FS-2570)
Connection of transceiver unit
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-2570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-2570 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FS-2570

Furuno FS-2570 User Manual - English - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info