522140
12
Zoom out
Zoom in
Previous page
1/91
Next page
1-4
Grounding
Run a copper strap (supplied) between the ground terminal of the antenna coupler and the
ship’s superstructure.
Copper strap
Braze
Ground plate
(a piece of steel plate)
Weld to ship's structure
Solder
For outdoor installation,
apply a coat of paint to prevent rust.
0.4 x 50 x 600
Ground for metallic hull
1.2.3 Mounting considerations
The splashproof construction of the antenna coupler permits installation either indoors or
outdoors. When selecting a location, keep in mind the following points.
Outdoor installation
Select a location not exposed to salt water spray. Salt water on the antenna insulator may
cause unstable operation of the coupler and in the worst case prevent transmission.
All wires from the coupler to the antenna radiate radio energy. They should be routed away
from any grounded conductors such as mast shrouds, or fittings.
For optimum radio energy, locate the coupler as near to the ground as possible.
The length of the vertical portion of the antenna should be as long as possible.
Leave enough space around the sides of the unit to permit maintenance and checking.
Total antenna length should be 7 to 30 meters.
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-1570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1570 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FS-1570

Furuno FS-1570 User Manual - English - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info