612626
33
Zoom out
Zoom in
Previous page
1/58
Next page
4-4
4.4 Maintenance
This radiotelephone equipment is designed and manufactured to provide years of intended per-
formance. For this, a regular maintenance program should be established and should at least
include the items listed in the table below:
Table 4-2 Maintenance
Item Check Point Remedy/Remarks
Whip antenna Check for physical damage, corrosion
and water leakage.
Replace damaged parts.
Wire antenna Check that antenna is properly spanned
and separated sufficiently apart from
metallic structures.
If necessary, re-span the
antenna.
Insulators for
antenna
installation
Check for salt water accumulation on
insulators.
Check that connection at lead-in insulator
is tight and rust-free.
Replace damaged insulators.
Remove salt water deposits.
Clean with fresh water, then
dry.
Remove rust, then tighten bolts
and lock nuts. Cover metallic
surface with sealing compound.
Antenna
coupler
Check contact at
* Antenna terminal
* Ground connection
* Coaxial cable
* Control cable(terminal board)
Check that coupler lid and cable glands
are firmly secured.
Check for physical damage, corrosion
and salt water deposits.
Tighten loosened connections.
Fasten lid firmly and evenly to
prevent water leakage.
Replace if damaged.
Transceiver Check contact at
* Antenna cable
* Ground connection
* Power cable
* Control cable
Confirm that there are no objects on the
top of the cabinet.
Tighten loosened connections;
remove foreign material from
connectors.
Remove objects to prevent
overheating.
Power supply Check that supply voltage at transmission
is within the rated range. (10.8-15.6 VDC
at the power connector)
If not within the range, call for
service. Low voltage may cause
erratic operation.
(Continued on next page)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-1503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info