612626
29
Zoom out
Zoom in
Previous page
1/58
Next page
3-3
9957 Squelch delay - a delay until the squelch mutes (closes) the receiver after
the signal has gone.
(Ex) 9957: 1000 ms
Squelch closes 1000 ms after the signal has gone.
Setting range: 500-4000 ms; Factory setting: 1000 ms
9958 Squelch activating frequency
Setting range: 500-2000 Hz; Factory setting: 1000 Hz
3.3 Writing User Channels
The user channels may write user Tx channels. (Rx channels may also be written where
permitted.)
1. Turn on the power while pressing the [CH] key. Release the key when MEMO appears.
2. Rotate the [FREQ/CH] control clockwise to display desired channel no. “R” appears (Rx
frequency writing mode).
3. Press the [MODE/1] key to select class of emission.
4. Press the [CH] key. Key in Rx frequency with the numeric keys (0-9) and press the
[ENT] key. If you are only writing Rx frequency go to step 8.
5. Rotate the [FREQ/CH] control clockwise. “T” appears (Tx frequency writing mode).
6. Enter Tx frequency like you entered Rx frequency.
7. Rotate the [FREQ/CH] control clockwise. If no station name have been written you will
see seven dashes. If station name cannot be entered for a particular station, the next
channel number appears.
8. Press the [CH] key to enter station name or write over existing name. The cursor
appears. A station name may consist of seven characters, hyphens, alphabet, numerics
and spaces are available.
9. Operate the [FREQ/CH] control to display character desired and press the [ENT] key. To
enter a space or shift the cursor press the [ENT] key. To erase station name, press [CH],
[0] and [ENT]. When seven characters are entered, the cursor disappears.
10. Turn off the power to register channels.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-1503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info