612626
9
Zoom out
Zoom in
Previous page
1/58
Next page
1-3
[SCAN/6] Turns the scan/sweep function on or off. “SCAN” or “SWEEP” appears on
the display when the scan or sweep function is on.
[RX] Selects an Rx frequency.
[TUNE/7] Tunes the antenna coupler. “TUNE” appears during tuning, and “OK” appears
after tuning is successfully completed.
[H/L /8] Alternately selects high or low output power.
[
/9] Adjusts backlighting of the keyboard and the display.
[CH] Enables entry of channel (by ten key).
[2182] Selects 2182 kHz on H3E (J3E may be selected depending on system setting).
[INT/0] Calls “remote station” (if connected). Press this key, enter station no. and then
press [ENT] key.
[ALM] Releases the two-tone alarm for 45 seconds. To transmit the alarm, press the
[ENT] key while holding down the [ALM] key. To silence it, press the [ENT/
STOP] key or the [ALM] key. Never press [ALM] + [ENT] except when own
ship is in distress.
[ENT] Concludes data entry.
[0]...[9] Enter numeric data.
Indications
The operation display provides the operational status by various marks and indications. Shown
below are the location and meaning of all available indications. They do not appear all at once
but when the related parts appear with respect to the mode selected.
ITU
CLAR
TR
02
4
6810
RF
ANT
LOW TUNE
SQ
REM
COM
DUMMY
J3E
H3E TLX FAX
AGC NB SWEEP SCAN
DUP
SIMP
01
2
345
OK
Cursor
Loudspeaker OFF
Squelch ON
Antenna
tuning
completed
Antenna tuning
in progress
Scan ON
Class of Emission
Remote control
ON
Intercom ON
Dummy antenna in
coupler ON
Low output power
AGC ON
Noise
Blanker
ON
Frequency Sweep ON
Tx output
(antenna
current)
Tx output
(RF level)
Simplex
Duplex
ITU channel
selected
Clarifier ON
TR: Tx, Rx freq.
R: Rx, freq.
* Rx channel
(Tx CH at Tx)
* Rx freq. or station name
(Tx freq. at Tx)
T
Transmit
MEMO
LSB
System setting mode
User channel
writing mode
* Tx/Rx CH only or Tx/Rx freq. only available thru system setting.
Figure 1-3 Indications
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS-1503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info