28338
104
Zoom out
Zoom in
Previous page
1/129
Next page
5. GPS OPERATION
5-2
5.2 Datum
Choose the datum type which matches the paper nautical charts you are using. Choose WGS-84
if the radar is connected to an AIS Transponder.
1. Press the MENU key to show the menu.
2. Choose GPS and press the ENTER key.
3. Choose Datum and press the ENTER key.
4. Choose appropriate datum type and press the ENTER key. For Other, do steps 5 and 6. For
other choices, go to step 7.
5. Choose Datum Number and press the ENTER key.
6. Use the trackball to choose datum number and press the ENTER key. (The setting range is
001-192 and 201-254.)
7. Press the MENU key to close the menu.
5.3 WAAS Setup
Geostationary satellites, the type used with WAAS, provide more accurate position data when
compared to GPS or DGPS. These satellites may be tracked automatically or manually. Auto
tracking automatically searches for the best geostationary satellite based on your current position.
1. Press the MENU key to show the menu.
2. Choose GPS and press the ENTER key.
3. Choose WAAS and press the ENTER key.
4. Choose Auto or Manual as appropriate and press the ENTER key. For Manual, do steps 5 and
6. For Auto, go to step 7.
5. Choose WAAS Number and press the ENTER key.
6. Use the trackball to choose appropriate WAAS satellite number and press the ENTER key.
7. Press the MENU key to close the menu.
WGS-84
Tokyo
Other
001
Auto
Manual
120
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR8062 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR8062 in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info