689492
12
Zoom out
Zoom in
Previous page
1/75
Next page
1-2
Assembling the scanner unit
The scanner unit consists of the scanner radiator and the scanner unit chassis,
and they are packed separately. Fasten the scanner radiator to the scanner unit
chassis as follows:
1. For the XN20AF, XN24AF, attach two guide pins to the underside of the scan-
ner radiator.
2. Remove the waveguide cap from the radiator bracket. The cap may be dis-
carded.
3. Coat the waveguide flange with anticorrosive sealant as shown in Figure 1-2.
Anticorrosive sealant
10 mm
O-ring
5 mm
Hole for
a guide pin
Hole for
a guide pin
Figure 1-2 Coating the waveguide flange with anticorrosive sealant
4. Coat fixing holes for the scanner radiator with anticorrosive sealant.
5. Grease the O-ring and set it to the O-ring groove of the radiator flange.
6. Set the scanner radiator to the radiator bracket.
7. For the XN20AF, XN24AF, coat hex bolts (M8 x 40, slotted washerhead, 8 pcs.)
with anticorrosive sealant and use them to loosely fasten the scanner radiator
to the scanner unit chassis. For the XN12AF, coat hex bolts, flat washers and
spring washers with anticorrosive sealant and use them to loosely fasten the
scanner radiator to the scanner unit chassis.
8. Remove two guide pins (inserted at step 1), and then tighten fixing bolts.
CAUTION
Be sure to remove the guide pins.
Injury may result if the guide pins loosen
and fall.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1525 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1525 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1525 MARK-3

Furuno FR1525 MARK-3 User Manual - English - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info