689491
109
Zoom out
Zoom in
Previous page
1/125
Next page
-8.9-
RMC - Recommended specific GPS/TRANSIT data
Time, date, position, course and speed data provided by a GPS or TRANSIT navigation receiver.
Checksum is mandatory in this sentence. This sentence is transmitted at intervals not exceeding 2
s and is always accompanied by RMB when a destination waypoint is active. RMC and RMB are
the recommended minimum data to be provided by a GPS or TRANSIT receiver. All data fields
must be provided, null fields used only when data is temporarily unavailable.
NOTE 1: Easterly variation (E) subtracts from true course. Westerly variation (W) adds to true course.
NOTE 2: Positioning system Mode indicator:
A= Autonomous mode
D= Differential mode
E= Estimated (dead reckoning) mode
M= Manual input mode
S= Simulator mode
N= Data not valid
NOTE 3: The positioning system Mode indicator field supplements the Status field (field No.2), which shall be
set to V = invalid for all values of Mode indicator except for A = Autonomous and D = Differential. The
positioning system Mode indicator and Status fields shall not be null fields.
$--RMC, hhmmss.ss, A, llll.ll, a yyyyy.yy, a, x.x, x.x, xxxxxx, x.x,a, a*hh<CR><LF>
Checksu, mandatory for RMC
Mode indicator (see notes 2 and 3)
Magnetic variation, degrees, E/W (see note 1)
Course over ground, degrees true
Longitude, E/W
Data: dd/mm/yy*
Latitude, N/S
UTC of position fix*
*: Not used
Speed over ground, knots
Status (see note 3) A= data valid V= navigation receiver warning
RSD - Radar system data
IMO Resolution A.477 (XII). Radar display setting data.
$--RSD, x.x, x.x, x.x, x.x, x.x, x.x, x.x, x.x, x.x, x.x, x.x, a, a*hh<CR><LF>
Checksum
Display rotation (see note 1)
Range units, K/N/S
Range scale in use
Cursor bearing, degrees clockwise from 0°
Cursor range, from own ship
EBL 2, degrees
VRM 2, range
Origin 2 bearing (see note 2) *
Origin 2 range (see note 2) *
Bearing line 1 (EBL 1), degrees from 0°
Variable range marker 1 (VRM 1), range
Origin 1 bearing, degrees from 0° (see note 2) *
Origin 1 range, from own ship (see note 2) *
* Not used
NOTES 1 Display rotation: C = course-up, course-over-ground up, degrees true
H = head-up, ship
s heading (center-line) 0
°
up
N = north-up, true north is 0
°
up
2 Origin 1 and 2 are located at the stated range and bearing from own ship and provide for two independent
sets of variable range markers (VRM) and electronic bearing lines (EBL) originating away from own ship
position.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info