689491
105
Zoom out
Zoom in
Previous page
1/125
Next page
-8.5-
GGA - Global positioning system (GPS) fix data
Time, position and fix related data for a GPS receiver.
Differential reference station ID, 0000-1023 *
Age of differential GPS data (see note 2) *
Units of geoidal separation, m *
Geoidal separation (see note 3) *
Units of antenna altitude, m *
Antenna altitude above/below
mean sea level (geoid) *
Horizontal dilution of precision *
Checksum
$--GGA, hhmmss.ss. 1111.11, a, yyyyy.yy, a, x, xx, x.x, x.x, M, x.x, M, x.x, xxxx*hh<CR><LF>
Number of satellites in use, 11-12, may be
different from the number in view *
GPS quality indicator (note 1)
Longitude - E/W
Latitude - N/S
UTC of position *
* Not used
NOTES
1 GPS quality indicator: 0 = fix not available or invalid 6 = Estimated (dead reckoning) mode
1 = GPS SPS mode, fix valid 7 = Manual input mode
2 = differential GPS, SPS mode, fix valid 8 = Simulator mode
3 = GPS PPS mode GPS fix valid
4 = Real Time Kinematic. Satellite system used in RTK mode with fixed integers
5 = Float RTK. Satellite system used in RTK mode with fixed floating integers
2 Time in seconds since last SC104 type 1 or 9 update, null field when DGPS is not used.
3 Geoidal separation: the difference between the WGS-84 earth ellipsoid and mean sea level (geoid), “-“ = mean sea
level below ellipsoid.
GLL - Geographic position - latitude/longitude
$--GLL, llll.ll, a yyyyy.yy, a, hhmmss.ss, A, a *hh<CR><LF>
Checksum
Mode indicator (see note 1 and note 2)
Status (see note 2) A = data valid V = data invalid
UTC of position*
Latitude, N/S
Longitude, E/W
*: Not used
NOTE 1: Positioning system Mode indicator:
A= Autonomous mode
D= Differential mode
E= Estimated (dead reckoning) mode
M= Manual input mode
S= Simulator mode
N= Data not valid
NOTE 2: The Mode Indicator field supplements the Status field (field 6). The Status field shall be set to V
= invalid for all values of Operating Mode except or A = Autonomous and D = Differential. The positioning
system Mode indicator and Status fields shall not be null fields.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info