689491
94
Zoom out
Zoom in
Previous page
1/125
Next page
-6.6-
6.3 Diagnostic Test
A diagnostic test program is provided to enable testing of major circuit boards in the radar display
unit. Note that the normal radar picture is lost during this test.
Proceed as follows to execute the diagnostic test:
1. Press [MENU] [0] [0] to show the OTHERS main.
2. Press the [0] key twice to select the OTHERS sub menu.
3. Press the [2] key twice to select TEST.
The diagnostic test is executed and the screen shows test results as shown on the next
page. OKs appear for normal operation. ARP TEST results appear only when optional ARP
Board is mounted. If NG (No Good) appears, corresponding components may be defective.
Consult your dealer.
4. Small squares displayed on the test results screen are for testing the controls and keys
(except POWER and [ENTER/SELECT] keys). As you operate these controls and keys,
corresponding squares are highlighted, indicating that your control/key operations are
properly recognized.
5. Press the [ENTER/SELECT] key to check the display circuit. See the illustration page 6-7.
6. To terminate the diagnostic test, press the [MENU] key.
Sequence for diagnostic test
[MENU] KEY
[0] key twice. [0] key twice.
MENU
1. VIDEO PLOT *
2. TGT TRAIL
3. TGT ALARM
4. WATCH TIME
5. ECHO SIG
6. FUNC
7. PLOT
8. MARK
9. BRILL
0. OTHERS
OTHERS
1. HDG SET
2. SPD MODE MAN LOG
LOG (S-BT)
LOG (S-WT)
3. MAN SPD
4. SET & DRIFT
5. DISPLAY
6. MARK/LINE
7. TUNE
8. NAV DATA
9. EBL/VRM/+
0.
OTHERS
1.
2. TEST
3. DEGAUSS
4. OUTPUT ALARM
5. INSTALL
Press the [2] key twice to start test. The following appears.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info