689491
58
Zoom out
Zoom in
Previous page
1/125
Next page
-1.44-
1.48 Alarms
The table below summarizes alarms which may occur at various warning conditions.
Warning Audible
alarm
Visual alarm To quit alarm status
HEADING
failure
2 beeps HDG label reads xxx.x° and the
message GYRO SIG MISSING
appears in red.
Display is automatically switched
to head-up mode within 1 min.
When the heading signal from
the gyrocompass restores
normal, the indication HDG SET
appears in red.
Match the on-screen HDG
readout with the actual compass
reading, if necessary. To stop
the audible alarm press the
AUDIO OFF key.
Press the MODE key to erase
HDG SET and correct the
heading readout.
Target alarm
(TAZ)
Beeps Target flashes. Press [TARGET ALARM] key.
WATCH alarm Beeps WATCH 0:00
(Label WATCH TIM turns red
and time count freezes at 0:00).
Press the [AUDIO OFF] key.
The label WATCH turns to
normal video and the timer is
reset.
Own ship
lat/lon
Cursor lat/lon
None xxx.x° In own ship position field
xxx.x° In cursor position field
Make sure that own ship
position data is fed from
external radionav equipment.
System failure None Message AZIMUTH SIGNAL
MISSING appears. No radar
echoes.
Incorrect
keystroke
Double
beep tone
None Correct keystroke creates a
single beep provided that KEY
BEEP ON is selected in initial
settings.
Log failure 2 beeps LOG xx.x and LOG SIGNAL
MISSING appear, if a log signal
is absent for 30 sec while an os
speed has been > 5.0 kt.
If the SDME has failed, use the
Manual Speed mode or other
appropriate sensor.
EPFS failure Continuous
beep
EPFS in red (EPFS: electronic
position-finding system)
The indication also appears
when the GPS mode is
switched between GPS and
DGPS.
To silence the beep, press the
[AUDIO OFF] key.
TRUE VECTOR
indication
None TRUE VECTOR (red) appears in
the second data cell when the
presentation mode is RM, goes
off in the North-up TM.
UPDATE PLOT None If you have failed to enter a
next EPA plot within 10 min,
this indication flashes. Plot
symbol of the target also
flashes.
Re-acquire the flashing target
within 5 min. Leave it if it is not
important.
COLLISION Continuous
beep
COLLISION comes on when
EPA- or ATA-tracked target is
on collision course.
Take evasive action or
terminate tracking of target.
Then, visual indication goes off.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info