689491
55
Zoom out
Zoom in
Previous page
1/125
Next page
-1.41-
1.47.2 Making a radar map
Mark entry
Marks can be entered in three different ways.
1. Press the [MENU] key and the [8] key twice to display
the MARK menu.
2. Press the [4] key to select the entry mode: Cursor, L/L
or OS Position. For L/L, key in position with the numeral
keys. Use + or – to specify N/E or S/W. Marks can be
entered at OS position only when menu is displayed.
3. Press the [ENTER/SELECT] key.
4. Press the [1] key and key in mark to enter with the ten
keys.
5. Press the [ENTER/SELECT] key.
6. Press the [MARK] key to enter mark.
7. Repeat step 6 to continue entering the same mark with
the same entry method. To enter a different mark or
change mark entry method, repeat above procedure.
The map is automatically stored in the radar’s memory.
Example: How to draw a coastline by cursor
1. Press the [MENU] key and the [8] key twice to display
the MARK menu.
2. Press [1] [1] [7] (for coastline mark) and press the
[ENTER/SELECT] key.
3. Press the [4] key to select Cursor and press the
[ENTER/SELECT] key.
4. Press the [MENU] key.
5. Place the cursor mark on a required position and press
the [MARK] key.
6. Place the cursor at a next position and press the
[MARK] key. One line appears connecting designated
two points.
7. Repeat step 6 to establish the coastline.
01
03
05
07
09
11
13
15
16 Nav Line
17 Coastline
18 Depth Contour
19 Prohibited Area
20 Cable
21 Erase
1.Mark Selection
02
04
06
08
10
12
14
2.Display
On Off
3.Erase
No
Erase Display
Erase All
4.Entry method
Cursor
L/L
OS Position
00°00.000'N
000°00.000'E
5.Posiiton Correction
Mark in use
0/3000
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info