689491
35
Zoom out
Zoom in
Previous page
1/125
Next page
-1.21-
1.25 Electronic Plotting Aid (EPA)
10 targets can be plotted electronically to assess their motion trend. Five past positions can be
displayed for each target. Working range of EPA is 0-48 nm irrespective of range scale. Note that
EPA is disabled when the ATA (ARP-17) is accommodated.
Target data is shown in the data display area including range, bearing, course, speed, CPA and
TCPA of the last-plotted or selected target.
EPA SYMBOLS
Target plotted
Plotted target and the data being read
Flashing: Targets in Target Alarm Zone
Target on a collision course
Target 2 is on a collision course as the extension of its
vector goes through the own ship position. Placing the
offset EBL will help for assessment. TCPA is counted
up to 99.59 min and beyond that it is indicated as
TCPA > 99.99 min.
Note: Plots will be lost when the compass or speed log fails.
1.25.1 Plotting a target
1. Place a cursor on a target of interest and press the
[PLOT SYMBOL] key. The target position changes
with a calculated speed and course every 1-2 seconds
by the auto follow-up feature, maintaining the
calculation origin at point (a). If option (7) TRACK is
ON, tracked positions are indicated by dots.
2. In more than 30 seconds but within 10 minutes, place the cursor on the latest calculated
position (b) and press the [ENTER/SELECT] key. The plot symbol changes from to . This
step is to identify the target on which you want the plotting data.
3. Place the cursor on the target within 5 seconds, maybe at a different location due to leeway at
(c), and press [PLOT SYMBOL] key. The vector will be drawn based on a trip between (a) and
(c). The target data is indicated in the text area to the right. Correction of plot position (c’), if
necessary, is possible within 5 seconds, to show the course made good and speed made good
(a-c’).
4. Do the same for other targets (maximum 10). For targets already in auto follow-up, do steps 2
and 3.
+
(b) Latest calculated
position
(a) First plot position
(c) 2nd plot position
+
(c') Re-entry for correction
000 010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
3
1
RNG 4.7NM
BRG 41.5°T
CSE 198.0°T WT
SPD 10.3K WT
CPA 0.9NM
TCPA 15:20
MAN 00:01
3 TRUE VECT
3Min WT
2
1
TAZ
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info