689491
26
Zoom out
Zoom in
Previous page
1/125
Next page
-1.12-
1.16 Suppressing Precipitation Clutter
The vertical beamwidth of the scanner is
designed to see surface targets even when the
ship is rolling. However, by this design the unit
will also detect rain clutter (rain, snow, or hail)
in the same manner as normal targets. Figure
at right shows the appearance of rain clutter
on the display.
The A/C RAIN control adjusts the receiver
sensitivity as the A/C SEA control does but
rather in a longer time period (longer range).
Clockwise rotation of this control increases the
anti-clutter effect.
A/C RAIN OFF A/C RAIN ON – Thin clouds
can be cleared
1.17 Interference Rejector
Mutual radar interference may occur in the vicinity of another shipborne
radar operating in the same frequency band (9 GHz). It is seen on the
screen as a number of bright spikes either in irregular patterns or in the
form of usually curved spoke-like dotted lines extending from the center
to the edge of the picture. Activating the interference rejector circuit can
reduce this type of interference.
The interference rejector is a kind of signal correlation circuit. It
compares the received signals over successive transmissions and
suppresses randomly occurring signals. There are three levels of
interference rejection depending on the number of transmissions that
are correlated. These are indicated by the legends IR1, IR2 and IR3 at
the upper-left position of the screen.
To activate the interference rejector;
1. Press the [F1] key. The following display appears.
1. VECTOR T/R
2. PULSE
3. INT REJ
4. STRETCH
5. ECHO AVG
6. CONTRAST
7. N REJ
8. DISP SEL
9. PM
0. SART
2. Press the [3] key to select interference rejection level (OFF, 1, 2, or 3) from the INT REJ field.
Selected level is shown as IR1, IR2 or IR3 at the bottom left-hand corner on the display.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1510 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1510 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1510 MARK-3

Furuno FR1510 MARK-3 Installation Guide - English - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info