689490
11
Zoom out
Zoom in
Previous page
1/75
Next page
1-1
MOUNTING
1.1 Scanner Unit
Mounting considerations
The scanner unit is generally installed either on top of the wheelhouse or on the
radar mast, on a suitable platform. Locate the scanner unit where there is a
good all-round view.
Figure 1-1 Mounting methods
No funnel, mast or derrick should be within the vertical beamwidth of the scan-
ner in the bow direction, especially zero degrees ±5°, to prevent blind sectors
and false echoes on the radar picture.
It is rarely possible to place the scanner unit where a completely clear view in
all directions is available. Thus, you should determine the angular width and
relative bearing of any shadow sectors for their influence on the radar at the
first opportunity after fitting.
Locate the antenna of a direction finder clear of the scanner unit to prevent
interference to the direction finder. A separation of more than two meters is
recommended.
To lessen the chance of picking up electrical interference, avoid where possible
routing the signal cable near other onboard electrical equipment. Also avoid
running the cable in parallel with power cables.
A magnetic compass will be af-
fected if placed too close to the
scanner unit. Observe the follow-
ing compass safe distances to
prevent deviation of a magnetic
compass.
Do not paint the radiator aperture, to ensure proper emission of the radar waves.
The signal cable run between the scanner and the display is available in lengths
of 15 m (standard), 20 m, and 30 m. Whatever length is used it must be unbro-
ken; namely, no splicing allowed.
Deposits and fumes from a funnel or other exhaust vent can adversely affect
the aerial performance and hot gases may distort the radiator portion. The scan-
ner unit must not be mounted where the temperature is more than 70°C.
Leave sufficient space around the unit for maintenance and servicing. See the
scanner unit outline drawing for recommended maintenance space.
Equipment Unit
Standard
Compass
Steering
Compass
Antenna unit (6 kW) 1.65 m 1.25 m
Antenna unit (12 kW) 1.65 m 1.25 m
Antenna unit (25 kW) 2.15 m 1.60 m
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FR1505 MARK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FR1505 MARK-3 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FR1505 MARK-3

Furuno FR1505 MARK-3 User Manual - English - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info