522142
79
Zoom out
Zoom in
Previous page
1/97
Next page
. INSTA ATION
-6
PS connections 4 ba d
NMEA INPUT (GPS Information)
The PS receiver must have the NMEA Output turned on and set to 4 00 aud in
the Setup menu. If there is a selection for PARIT , select NONE.
For further information on interfacing and setting up your PS receiver, contact the
manufacturer of the PS receiver.
The FM-4721 can read NMEA-01 3 version 2.0 or higher.
The NMEA 01 3 input sentences are , A, RMC and NS (RMC sentence is
recommended).
NMEA Output (DSC)
The NMEA 01 3 output sentences are DSC and DSE.
How to chec PS recei er connections
After you have connected the FM-4721 to the PS receiver, your position in latitude
and longitude should appear on the display. If your position does not appear, the PS
icon flashes continuously. Check the connection between the radio and the PS re-
ceiver.
Note: The indication POS Data Manual appears when position is input manually.
.6 Handset HS-4721
The Handset remotely controls the Radio, DSC, and PA/Fog functions. In addition, the
FM-4721 can operate as a full function intercom system between the HS-4721 and the
FM-4721.
1. Connect the Extension Cable to the Handset connector (eight pin) on the rear
panel, then tighten the Nut (see illustration on the next page).
2. Referring to illustration on the next page, make a 30 mm hole in the wall, then in-
sert the Extension Cable into this hole. Connect the asket and Mounting racket
to the Extension Cable Connector using the Nut.
ire Color/Description Connection
E - NMEA Input ( ) PS NMEA output ( )
REEN - NMEA Input (-) PS NMEA output (-) or common ground
ire Color/Description Connection
RA - NMEA Output ( ) Chart plotter NMEA input ( )
RO N - NMEA Output (-) PS NMEA input (-) or common ground
www.busse-yachtshop.de | info@busse-yachtshop.de
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info