522142
70
Zoom out
Zoom in
Previous page
1/97
Next page
7-1
7. MAINTENANCE,
TROUBLESHOOTING
7.1 General Maintenance
The inherent quality of the solid-state components used in this transceiver should pro-
vide many years of continuous use. However, take the following precautions to pre-
vent damage to the transceiver.
Keep the microphone connected or the jack covered at all times to prevent corro-
sion of electrical contacts.
Remove dust from the cabinet with a dry clean cloth. Do not use commercial clean-
ers to clean the equipment. Those cleaners can remove paint and markers.
Check that all cables are tightly fastened. Check the cables for corrosion and rust.
Connect the cables that have loosened. Replace any damaged cables.
Never key the microphone unless an antenna or suitable dummy load is connected
to the transceiver.
The supply voltage range to the transceiver must be within 10.8 - 15.6 VDC.
Use only FURUNO-approved accessories and replacement parts.
Wipe the LCD carefully to prevent scratching, using tissue paper and an LCD clean-
er. To remove dirt or salt deposits, use an LCD cleaner, wiping slowly with tissue
paper so as to dissolve the dirt or salt. Change paper frequently so the salt or dirt
does not scratch the LCD. Do not use solvents such as thinner, acetone or benzene
for cleaning.
In the unlikely event of serious problems, please contact your dealer.
CAUTION
The heatsink can get hot enough to cause a
burn injury. Allow the unit to cool before do-
ing any maintenance procedures.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
This equipment uses high
voltage that can cause
electrical shock.
0nly qualified persons can
work inside the equipment.
NOTICE
D
o not apply paint, anti-corrosive
sealant or contact spray to plastic
parts or equipment coating.
Those items contain products that can
damage plastic parts and equipment
coating.
www.busse-yachtshop.de | info@busse-yachtshop.de
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info