522142
13
Zoom out
Zoom in
Previous page
1/97
Next page
2. OPERATION
-
7 Select channels and select menu items. The S and T keys on the
microphone can also be used to select channels and menu items.
In the PA or Fog mode, change the output volume of the connected
horn speaker.
8
(POWER)
Power the transceiver on and off. To turn the transceiver on, press and
hold this key until the LCD turns on. To turn it off, press and hold this key
until the LCD turns off. When the power is turned on, the transceiver is
set to the last-selected channel.
9 MIC connector Connector for the supplied noise-canceling speaker microphone.
10 1 When in the radio mode, this key directly inputs the digit 1 in a channel
number.
E R Directly input the digit 2 in a channel number.
UN E Memori e the selected channel into the
transceiver scan memory for scanning. Repeat the same procedure
( UN E ) to delete the channel from the scan memory. See
section 2.10 Scanning for details.
SAN R Directly input the digit 3 in a channel number.
UN key SAN key Start and stop scanning on programmed
channels. This function depends on scanning type setting. See
section 2.10 Scanning for details.
4 R Directly input the digit 4 in a channel number.
UN key4 key Access the LCD Dimmer menu. See
section 2.7 Backlight Ad ustment for details.
R Directly input the digit 5 in a channel number.
UN key key Activate the intercom mode between the radio
and the Handset. See section 2.13 Intercom Operation for details.
R Directly input the digit 6 in a channel number.
UN key key Scan for voice communications on the priority
channel and another selected channel until a signal is received on ei-
ther channel (Dual Watch). See section 2.9 Dual Watch (To CH16)
for details.
SR R Directly input the digit
7 in a channel number.
UN
key S
R key Operate the oice Scrambler function
when the optional F P-42 oice Scrambler Unit is installed. See
section 2.15 oice Scrambler (option) for details.
PA R Directly input the digit 8 in a channel number.
UN key PA key Operate the 30 Watt PA function. See
section 2.12 PA HAIL, FOG HORN Operation for details.
G R Directly input the digit 9 in a channel number.
UN key G key Operate the Fog Horn function. See
section 2.12 PA HAIL, FOG HORN Operation for details.
In the radio mode, directly input the digit 0 in a channel number.
LR Cancel the menu selection and/or key input.
Press and hold the key to recall the previously selected NOAA weath-
er channel from any channel. Press and hold the key again to revert
to the previously selected working channel.
ENT Confirm the menu selection and/or key input.
UN Activate the Alternate key function.
11 STRESS Send a DSC Distress Alert. See section 3.3.1 How to transmit a DSC
Distress Alert .
N.
www.busse-yachtshop.de | info@busse-yachtshop.de
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FM-4721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FM-4721 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info