543382
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
Erasing track between two points, area
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show OWN TRACK DELETE/EXIT or TGT TRACK
DELETE/EXIT in the guidance box at the bottom right-hand corner on the screen,
whichever track you want to erase.
3. Use the trackball to place the cursor at the top-left corner of the area (or 1st point
in case of erasure by two points) then push the left button.
4. Use the trackball to drag the cursor at the bottom-right corner of the area (or 2nd
point in case of erasure by two points). If the erasure method (chosen on the pre-
vious page) is "AREA", a rectangle appears when you start dragging the cursor.
5. Push the left button to erase track.
6. Push the right button to quit.
Note that this function is automatically canceled if there is no erasure occurring in 30
seconds.
Erasing all track of a target
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show TGT TRACK DELETE/EXIT in
the guidance box at the bottom right-hand corner on the
screen.
3. Use the trackball to put the cursor on the track you want to erase then push the left
button to erase track.
4. Push the right button to quit.
Automatically displaying other target tracks
The tracks of 15 acquired targets (numbered 1-15) may be automatically displayed.
When the lost target alarm sounds for a lost target, the number of that target is auto-
matically reused when another target is acquired.
1. Right-click the MENU box.
2. Select 5 [PLOTTER] then push the left button.
3. Select 0 AUTO TARGET TRACK then push the left button.
4. Select ON then push the left button.
5. Push the right button twice to close the menu. To display the track of a specific
target, turn off AUTO TARGET TRACK and do the following:
1) In the PLOTTER menu, set 5 TGT TRACK INTERVAL to other than OFF.
2) Place the cursor inside the effective display area.
3) Spin the scrollwheel to show TARGET TRACK ON /
EXIT in the guidance box.
4) Place the cursor on the target for which you want to
show its track then push the left button.
5) Push the right button to finish.
OWN TRACK
DELETE
EXIT TGT TRACK
DELETE
EXIT
TGT TRACK
DELETE
EXIT
TARGET
TRACK ON
EXIT
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FAR-2107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FAR-2107 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info