543382
33
Zoom out
Zoom in
Previous page
1/52
Next page
www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
MARINE RADAR
FAR-2107/FAR-2807 SERIES
Operators Manual:
Fishing Vessel Specifications
The purpose of this manual is to provide the operating procedures for the functions available with
the fishing vessel specifications models (50 kW and 60 kW models) of the FAR-2107/FAR-2807
series radar. This manual is provided in addition to the Operator's Manual, which covers features
common to all radars in this radar series.
Specification type is set during installation. For details, contact a FURUNO agent or dealer.
Operation from the menu involves spinning the scrollwheel to select menu item or option then
pushing the scrollwheel or left button to confirm selection. For sake of brevity, we write "Select
XXX" (XXX=name of menu item) when you would spin the scrollwheel to make a selection and
"push the left button" when you confirm selection.
Contents
1. TARGET TRAIL FUNCTIONS................... 2
1.1 Long Trails....................................................2
1.2 Trail Color.....................................................3
1.3 Trail Color Shift.............................................4
1.4 Hiding Trails .................................................5
1.5 Trail Eraser...................................................6
1.6 Narrow Trails................................................7
1.7 Preventing True Sea Clutter Trails...............7
2. CURSORS ................................................. 8
2.1 Crosshairs Cursor Size ................................8
2.2 Net Cursor....................................................9
2.3 Cursor Data Display ...................................11
2.4 Bearing Scale Format.................................12
3. OTHER FUNCTIONS............................... 13
3.1 Echo Display Area......................................13
3.2 Turning On-screen Boxes On/Of................14
3.3 Radar Picture Color....................................15
3.4 Bearing Reference .....................................16
3.5 VRM, Cursor Unit .......................................17
3.6 Pop-up Guidance .......................................17
4. FUNCTION KEYS (F1 - F4) .....................18
4.1 F1, F2 and F3 Keys.................................... 18
4.2 Operating the F4 Key................................. 27
5. ANCHOR WATCH ALARM......................31
6. VIDEO PLOTTER FUNCTIONS...............32
6.1 Depth Contour with Depth Indication ......... 32
6.2 Mark Settings .............................................33
6.3 Track Settings ............................................36
6.4 GPS Buoy .................................................. 41
7. ARP SYMBOLS .......................................42
8. DISPLAYING PICTURE FROM
EXTERNAL RADAR ................................43
9. MENU TREE.............................................44
2
1. TARGET TRAIL FUNCTIONS
1.1 Long Trails
The fishing vessel specifications radar provides trail lengths of 12 h, 24 h and 48 h, in
addition to the “standard” trail lengths of 15 s, 30 s, 1 min, 3 min, 6 min, 15 min, 30 min
and continuous. To select a trail length, do the following:
1. Place the cursor on the TRAIL MODE box at the bottom right-hand corner on the
screen.
2. Right-click the box to open the TRAIL
menu.
3. Select 8 TRAIL LENGTH then push the left
button.
4. Select NORMAL, 12H, 24H, or 48H as
appropriate then push the left button.
NORMAL: Trail lengths of 15 s, 30 s, 1 min,
3 min, 6 min, 15 min, 30 min and contin-
uous, selectable from the TRAIL MODE
box.
12H: Max. 12-hour trails
24H: Max. 24-hour trails
48H: Max. 48-hour trails
Note: Trail data is erased and the TRAIL
MODE box setting shows "OFF" whenever
a trail length is chosen from the menu.
5. Push the right button to close the menu.
6. If you chose the 12H, 24H or 48H trail
length, select how many minutes of trails to
show in the chosen time period, from the
TRAIL MODE box. Settings and corre-
sponding trail times are
12H: 30 minute increments
24H: 1 hour increments
48H: 2 hour increments
For example, you have selected 12H from the TRAIL menu and 30 minutes from
the TRAIL MODE box. Then, 30 minutes worth of trails are displayed over the 12-
hour time period.
Note: When 2 TRAIL GRAD is set for SINGLE, long trails (12H/24H/48H) are painted
in various colors (see section 1.2) and standard trails are painted in single color. For
long trails, select SINGLE, since MULTI paints trails in a single color.
TRUE TRAIL OFF
* Shown when 8 TRAIL LENGTH
is selected to other than "NORMAL".
[TRAIL
MENU]
1 TRAIL MODE
REL/TRUE
2 TRAIL GRAD
SINGLE/MULTI
3 NARROW TRAIL
OFF/1/2
4 TRAIL LEVEL
1/2/3/4
5 TRAIL RESTART
OFF/ON
6 TRAIL COPY
OFF/ON
7 OS TRAIL
OFF/ON
8 TRAIL LENGTH
NORMAL/12H/24H/48H
9 TRAIL HIDE*
START 00:00
END 00:00
0 [TRAIL COLOR]*
3
1.2 Trail Color
The color of target trails may be chosen from among fuchsia, maroon, red, purple,
yellow, lime, green, olive, teal, cyan, blue, and navy, when 2 TRAIL GRAD and 8
TRAIL LENGTH on the TRAIL menu are set for SINGLE and other than NORMAL,
respectively.
1. Right-click the TRAIL MODE box.
2. Select 0 [TRAIL COLOR] then push the left button.
Note: 3 TRAIL COLOR shows numbers from 1 to 12 and the color currently
selected for each number. Trail color changes at intervals according to trail length
setting as follows:
12 hour trails: Trail color changes once every hour.
24 hour trails: Trail color changes once every two hours.
48 hour trails: Trail color changes once every four hours.
The color of the track will change in the color order specified here when 3 COLOR
SHIFT (see the next page) is activated. These colors can be changed by con-
tinuing this procedure.
3. Select 3 TRAIL COLOR then push the left button. The cursor is choosing color
number 1.
4. Select color desired then push the left button.
5. Set colors for other numbers similarly. (Push the left button to select color number.)
6. Push the right button three times to close the menu.
[TRAIL
COLOR]
1 BACK
2 COLOR SHIFT
NO/YES
3 TRAIL COLOR
1: FUCHSIA
2: MAROON
3: RED
4: PURPLE
5: YELLOW
6: LIME
7: GREEN
8: OLIVE
9: TEAL
10: CYAN
11: BLUE
12: NAVY
4
1.3 Trail Color Shift
When there are many trails on the screen, especially when using long trails, it is diffi-
cult to distinguish past tracks from current tracks since they are the same color. With
the trail color shift feature, tracks are painted in a different color from the point when
color shift is activated. For example, the current track color is 1: FUCHSIA. Then, at
the moment the trail color shift is made active, trails from that point will be painted in
2: MAROON.
Note: At the moment the trail color shift is activated, the trail colors in effect after the
time set in the TRAIL MODE box are erased. For example, the trail length is 12
HOURS and the time set in the TRAIL MODE box is 05:00. Then, using the illustration
above as an example, 6: LIME will not be shown.
2 TRAIL GRAD in the TRAIL menu must be set to SINGLE and 8 TRAIL LENGTH to
other than NORMAL in order to activate the trail color shift feature.
1. Right-click the TRAIL MODE box.
2. Select 0 [TRAIL COLOR] then push the left button.
3. Select 2 COLOR SHIFT then push the left button.
4. Select YES then push the left button.
5. Push the right button twice to close the menu.
Target
Echo trail
1:FUCHSIA 2:MAROON 3:RED 4:PPL 5:YEL
2:MAROON
3:RED 4:PPL 5:YEL 6:LIME
Trail color before shift
Trail color after shift
Fuchsia color
displayed up to
this point
Target
[TRAIL
COLOR]
1 BACK
2 COLOR SHIFT
NO/YES
3 TRAIL COLOR
1: FUCHSIA
2: MAROON
3: RED
4: PURPLE
5: YELLOW
6: LIME
7: GREEN
8: OLIVE
9: TEAL
10: CYAN
11: BLUE
12: NAVY
5
1.4 Hiding Trails
Trails may be "hidden" (painted in light gray) for the period you specify, when 8 TRAIL
LENGTH on the TRAIL menu is selected to other than "NORMAL".
1. Right-click the TRAIL MODE box.
2. Select 9 TRAIL HIDE then push the left button.
3. Use the scrollwheel to set START time: Spin the scrollwheel to set time then push
it to confirm.
4. Set END time similarly.
Note: Time increment depends on the setting of 8 TRAIL LENGTH as follows:
12H trail length: 30-minute increments
24H trail length: 1-hour increments
48H trail length: 2-hour increments
5. Push the right button to close the menu.
To cancel this feature, set START and END times to 00:00.
* Shown when 8 TRAIL LENGTH
is selected to other than "NORMAL".
[TRAIL
MENU]
1 TRAIL MODE
REL/TRUE
2 TRAIL GRAD
SINGLE/MULTI
3 NARROW TRAIL
OFF/1/2
4 TRAIL LEVEL
1/2/3/4
5 TRAIL RESTART
OFF/ON
6 TRAIL COPY
OFF/ON
7 OS TRAIL
OFF/ON
8 TRAIL LENGTH
NORMAL/12H/24H/48H
9 TRAIL HIDE*
START 00:00
END 00:00
0 [TRAIL COLOR]*
6
1.5 Trail Eraser
The trail eraser allows you to erase a portion of a trail you select. This is useful when
the screen becomes cluttered with trails.
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show "T-ERASER L=ERASE / EXIT" in the guidance box
at the bottom right-hand corner on the screen.
3. Push the left button successively to select eraser width, from the four choices
shown below. (This also may be done anytime while the guidance box shows the
above-mentioned indication.)
4. Do one of the following to erase a target trail:
To erase a specific point or if you are using a trackball control unit (RCU-015 or
RCU-016), place the cursor on the part of the trail to erase and long-push the left
button. Trails within the track eraser are erased. To continue erasing, repeat the
above procedure.
To erase trails in a wide area, select trail with the cursor, and roll the trackball
while pressing and holding down the [ALARM ACK] key. Trails which contact the
edge of the track eraser are erased.
A beep sounds when the right button, [ALARM ACK] key or trackball is operated.
Note: The trail eraser feature erases only track currently shown on the display. To
erase track stored in the memory, select a long trail time (from the TRAIL MODE
box), to show more trail on the display.
5. To quit the trail eraser feature, push the right button. (This feature is automatically
cancelled when no erasing is done for approx. 30 seconds.)
T-ERASER
L=ERASE
EXIT
Large
Medium
Extra Large
Small
7
1.6 Narrow Trails
Target trails may be painted with thinner lines if desired. This can be useful when there
are a lot of target trails on the screen.
1. Right-click the TRAIL MODE box to display the TRAIL menu.
2. Select 3 NARROW TRAIL then push the left button.
3. Select OFF, 1 or 2 as appropriate then push the left button. "2" is thinner than "1".
4. Push the right button to close the menu.
1.7 Preventing True Sea Clutter Trails
You can prevent the tracing of true sea clutter trails near your ship to view the situation
around your ship more easily. Further, you may enable/disable your ship’s trails.
1. Right-click the TRAIL MODE box at the bottom right corner on the screen.
2. Select 7 OS TRAIL then push the left button.
3. Select OFF, 1 or 2 as appropriate then push the left button.
4. Right-click to close the menu.
Setting
Draw your
ship’s track
Prevent true sea clutter trails
near your ship
OFF No No
1Yes Yes
2No Yes
8
2. CURSORS
2.1 Crosshairs Cursor Size
The size of the crosshairs cursor (+) can be chosen from small or large. The large
cursor is useful when a large echo masks the small cursor.
1. Place the cursor inside the effective display area.
2. If the guidance box is currently showing "TARGET DATA & ACQ / CURSOR
MENU", push the right button once to show the CURSOR menu. If it is not currently
shown, push the right button twice.
3. Use the trackball to select 9 CURSOR SIZE then push the left button. (For key-
board-equipped control unit, you may select size by pressing the [9] key.)
4. Select cursor size desired then push the left button.
5. Push the right button to quit the CURSOR menu.
6
HEAD UP TB RM
MENU
ANT 1 X-BAND
PULSE S1
PICTURE4
IR OFF
ES OFF
EAV OFF
AUTO RAIN
OFF
NM
/1
DISPLAY
RADAR
GAIN
SEA AUTO
RAIN
TUNE AUTO
0. 9ktDRIFT
000. 0°TSET
34°40. 649 N
135°18. 303 E
+
TAR GET
LIST
CU/TM
RESET
ALARM
ACK
GZ1
IL1
MARK
032. 0°T
RED
+
BRILL1
HL
OFF
EBL1
>280.9°T<
EBL2
240. 8°R
TX
STBY
5. 60NM
ON
GZ2
ALARM1
ALARM2
VRM1
>3.682NM<
VRM2
5.221NM
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
TRUE TRAIL OFF
25
22
19
ALIGN
26
TRIAL OFF
REF POINT
ANT POSN
6
HEAD UP TB RM
MENU
ANT 1 X-BAND
PULSE S1
PICTURE4
IR OFF
ES OFF
EAV OFF
AUTO RAIN
OFF
NM
/1
DISPLAY
RADAR
GAIN
SEA AUTO
RAIN
TUNE AUTO
0. 9ktDRIFT
000. 0°TSET
34°40. 649 N
135°18. 303 E
+
TAR GET
LIST
CU/TM
RESET
ALARM
ACK
GZ1
IL1
MARK
032. 0°T
RED
+
BRILL1
HL
OFF
EBL1
>280.9°T<
EBL2
240. 8°R
TX
STBY
5. 60NM
ON
GZ2
ALARM1
ALARM2
VRM1
>3.682NM<
VRM2
5.221NM
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
TRUE TRAIL OFF
25
22
19
ALIGN
26
TRIAL OFF
REF POINT
ANT POSN
Standard
cursor
Large
cursor
TGT TRK
IND/MAG
TGT TRK
IND/MAG
2
TARGET DATA & ACQ*/
TARGET CANCEL*/
ARP TGT DATA & ACQ*/
TARGET TRACK ON*/
TARGET TRACK OFF*/
REF MARK*/
EBL OFFSET/
OFFCENTER/
ZOOM*/
MARK DELETE/
OWN TRACK DELETE/
TGT TRACK DELETE/
CHART ALIGN/
TRAIL ERASER*
8
9 CURSOR SIZE
SMALL/LARGE
[CURSOR
MENU]
* Not available on the Plotter display.
9
2.2 Net Cursor
The net cursor is used to depict your fishing net on the radar display. It is especially
useful for bottom trawlers for knowing where the net is located. Enter the dimensions
of your net in the menu to show the net in scale on the display.
Activating the net cursor
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select [9 EBL, VRM, CURSOR SET] then push the left button.
4. Select 8 [ CURSOR SHAPE] then push the left button.
Net curso
r
EBL2
[EBL, VRM, CURSOR SET]
1 BACK
2 EBL1
REL/TRUE
3 EBL2
REL/TRUE
4 VRM1
NM/SM/km/kyd
5 VRM2
NM/SM/km/kyd
6 CURSOR BEARING
REL/TRUE
7 CURSOR RANGE
NM/SM/km/kyd
8 [ CURSOR SHAPE]
9 CURSOR BRG SCALE
360°/32 POINTS
[ CURSOR SHAPE]
1 BACK
2 CURSOR
OFF/ON
3 FRONT HALF LENGTH
0.0m
4 REAR HALF LENGTH
0.0m
5 NET WIDTH
0.0m
6 ROTATE STEP
360°/32 POINTS
WARP LENGTH
0.0m
10
5. Select 2 CURSOR then push the left button.
6. Select ON then push the left button to enable the net cursor. EBL2 is then auto-
matically turned on.
7. Push the right button four times to close the menu.
Setting net cursor dimensions, adjusting net cursor
orientation
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select 9 [EBL, VRM, CURSOR SET] then push the left button.
4. Select 8 [ CURSOR SHAPE] then push the left button.
5. Set net cursor dimensions as follows, refer-
ring to the illustration at right.
1) Select FRONT HALF LENGTH then push
the left button.
2) Spin the scrollwheel to set front half length
(0-3000 m) then push the left button.
3) Set REAR HALF LENGTH and NET WIDTH
similarly.
Warp length (a+b in the illustration at right) is
indicated at the bottom of the menu. The net
cursor is placed at the screen center, with its
top and bottom points bisected by EBL2. To
adjust the position of the net cursor, go to step
6. Otherwise, go to step 9.
6. Select 6 ROTATE STEP then push the left button.
7. Select 360° or 32 POINTS as appropriate then push the left button. These figures
determine how finely to rotate the EBL2 when adjusting the orientation of the net
cursor. Select 360° for fine rotation or 32 POINTS for coarse rotation.
8. Use the rotary encoder for the EBL to adjust the orientation of the net cursor.
9. Push the right button four times to close the menu.
[ CURSOR SHAPE]
1 BACK
2 CURSOR
OFF/ON
3 FRONT HALF LENGTH
0.0m
4 REAR HALF LENGTH
0.0m
5 NET WIDTH
0.0m
6 ROTATE STEP
360°/32 POINTS
WARP LENGTH
0.0m
FRONT HALF
LENGTH
REAR HALF
LENGTH
NET WIDTH
a
b
11
10.Use the EBL offset feature to anchor the net cursor at net origin point.
1) Push the EBL OFFSET key.
2) Use the trackball to set net origin point.
3) Press the EBL OFFSET key to anchor the net cursor.
11. Steer the vessel so your ship’s trail runs along the net cursor then throw the net.
2.3 Cursor Data Display
The cursor data box, which is located at the top right corner on the screen, can show
latitude and longitude position of the cursor, X- and Y-coordinates, and range and
bearing from your ship to the cursor. Further, if set and drift corrections are disabled,
two cursor data boxes may be shown, to display two sets of position information.
Left-click the cursor data box successively to change cursor data in the sequence
shown below.
+
0.280 NM
0.374 NM
+
36°23.693 N
138°31.377 E
Latitude and longitude
X-Y coordinate
X-coordinate
(Starboard: plus, Port: minus)
036.7°T
0.466 NM
Range and bearing from
own ship
00:01
TTG to
cursor position
+
Y-coordinate (bow)
(Upward: plus, Downward: minus)
12
2.4 Bearing Scale Format
The bearing scale can be displayed with numerical indications or 32 compass points.
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select 9 [EBL, VRM CURSOR SET] then push the left button.
4. Select 9 CURSOR BRG SCALE then push the left button.
5. Select 360° or 32 POINTS as applicable.
6. Push the right button three times to close the menu.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360°
32 POINTS
N
NNE
NE
ENE
E
ESE
SE
SSE
S
SSW
SW
WSW
W
WNW
NW
NNW
[EBL, VRM, CURSOR SET]
1 BACK
2 EBL1
REL/TRUE
3 EBL2
REL/TRUE
4 VRM1
NM/SM/KM/kyd
5 VRM1
NM/SM/KM/kyd
6 CURSOR BEARING
REL/TRUE
7 CURSOR RANGE
NM/SM/KM/kyd
8 [ CURSOR SHAPE]
9 CURSOR BRG SCALE
360°/32 POINTS
13
3. OTHER FUNCTIONS
3.1 Echo Display Area
Three types of echo display areas are available: circle, wide and all. "All" uses the
entire screen, which allows you to view long-range targets.
1. Left-click the MENU box at the right side of the screen.
2. Select 1 [ECHO] then push the left button to show the ECHO menu.
3. Select 7 ECHO AREA then push the left button.
4. Select CIRCLE, WIDE or ALL as applicable, referring to the illustration above.
5. Push the right button twice to close the menu.
CIRCLE WIDE ALL
: Echo display area
[ECHO]
1 BACK
2 2
ND
ECHO REJ
OFF/ON
3 TUNE INITIALIZE
4 PM*
1
OFF/ON
5 SART
OFF/ON
6 WIPER
OFF/1/2
7 ECHO AREA
CIRCLE/WIDE/ALL
*
1
Not available on FAR-2157/2167DS
8 [PICTURE SELECT]
14
3.2 Turning On-screen Boxes On/Off
If you are using the "wide" or "all" echo display area, the on-screen boxes and indica-
tions outside the effective display area (data fields at right 1/4 of screen are not
included) may obscure radar targets. To view those radar targets, you can turn the
boxes and indications off, by a function key. The default setting of the F2 key turns the
boxes on/off. If the function of the F2 key is set for other than ICON DISP, program for
that function (see "Programming the F1, F2 and F3 keys" on page 24) then follow the
procedure below.
1. Press the F2 key.
2. Select 6 ICON DISP then push the left button. Each press of the button turns the
boxes and indications on or off alternately.
3. Push the right button to close the menu.
6
HEAD UP TB RM
MENU
ANT 1 X-BAND
PULSE S1
PICTURE4
IR OFF
ES OFF
EAV OFF
AUTO RAIN
OFF
NM
/1
DISPLAY
RADAR
GAIN
SEA AUTO
RAIN
TUNE AUTO
0. 9ktDRIFT
000. 0°TSET
34°40. 649 N
135°18. 303 E
+
TAR GET
LIST
CU/TM
RESET
ALARM
ACK
GZ1
IL1
MARK
032. 0°T
RED
+
BRILL1
HL
OFF
EBL1
>280.9°T<
EBL2
240. 8°R
TX
STBY
5. 60NM
ON
GZ2
ALARM1
ALARM2
VRM1
>3.682NM<
VRM2
5.221NM
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
TRUE TRAIL OFF
25
22
19
26
TRIAL OFF
REF POINT
ANT POSN
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
Box
Indication
ON OFF
TGT TRK
IND/MAG
[F2 EXECUTION]
1 OS
TRAIL
2 BRILL
3 DISP
ARP
4 DISP
AIS
5 DISPLAY
SELECT
6 ICON DISP
7 PICTURE1
8 PICTURE2
9 PICTURE3
0 PICTURE4
15
3.3 Radar Picture Color
Radar echoes may be displayed in a single color of yellow, green or white, or in multi-
color. The multi-color feature paints echoes in red, yellow or green, in order of
descending strength.
1. Set the cursor in the BRILL box at the lower left corner.
2. RIght-click the box to show the BRILL1 menu.
3. Select 1 ECHO COLOR then push the left button.
4. Select YEL, GRN, WHT or COLOR as applicable then push the left button.
5. Push the right button to close the menu.
BRILL1
100
[BRILL1 MENU (1/2)]
1 ECHO COLOR
YEL/GRN/
WHT/COLOR
2 BKGD COLOR
BLK-GRN/
BLK-RED/
BLU-CIR/
BLU/BRT-BLU
3 PANEL DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
0 NEXT
16
3.4 Bearing Reference
The EBL bearing (and cursor bearing) can be referenced to your ship heading (relative
bearing) or North (true bearing). This radar indicates true or relative bearings with an
R or T in the EBL and cursor data boxes. In the head-up and cursor gyro modes you
can switch between true and relative bearings. In all other modes true bearings are
normally displayed. Heading signal is required to display true bearing.
To select bearing reference, do the following:
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select 9 [EBL, VRM CURSOR SET] then push the left button.
4. Select 2 EBL1, 3 EBL2 or 6 CURSOR BEARING as applicable then push the left
button.
5. Select REL or TRUE as applicable then push the left button.
6. Push the right button three times to close the menu.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
EBL1
EBL2
>230.0
°
R<
335.2
°
R
VRM1
VRM2
>0.500NM<
0.980NM
VRM2
VRM1
EBL1
EBL2
VRM1 Box
VRM2 Box
EBL1 Box
EBL2 Box
021.0°R
1.505NM
00:10
+
Cursor
Cursor Data Box
[EBL, VRM, CURSOR SET]
1 BACK
2 EBL1
REL/TRUE
3 EBL2
REL/TRUE
4 VRM1
NM/SM/km/kyd
5 VRM2
NM/SM/km/kyd
6 CURSOR BEARING
REL/TRUE
7 CURSOR RANGE
NM/SM/km/kyd
8 [ CURSOR SHAPE]
9 CURSOR BRG SCALE
360°/32 POINTS
17
3.5 VRM, Cursor Unit
The unit of range measurement for the VRM and cursor can be selected from among
nautical mile, statute mile, kilometer and kiloyard. See the illustration on the previous
page for location of VRM and cursor data.
1. Left-click the MENU box.
2. Select 2 [MARK] then push the left button.
3. Select 9 [EBL, VRM CURSOR SET] then push the left button.
4. Select 4 VRM1, 5 VRM2 or 7 CURSOR RANGE as applicable then push the left
button.
5. Select NM, SM, km or kyd as applicable then push the left button.
6. Push the right button three times to close the menu.
3.6 Pop-up Guidance
You can show pop-up guidance for the on-screen boxes. WIth this feature turned on,
simply set the cursor inside a box to show pop-up guidance for that box.
1. Left-click the MENU box at the right side of the screen.
2. Select 9 [CUSTOMIZE/TEST] then push the left button.
3. Select 7 [OPERATION] then push the left button.
4. Select 5 POPUP GUIDANCE then push the left button.
5. Select ON then push the left button.
6. Push the right button three times to close the menu.
[OPERATION (1/2)]
1 BACK
2 WHEEL DRIVE
NORMAL/REVERSE
3 KEY BEEP
OFF/LO/MID/HI
4 REMOTE KEY
F*-KEY/
DISPLAY SELECT
5 POPUP GUIDANCE
OFF/ON
6 OWN SHIP VECTOR
OFF/HDG/COURSE
7 STERN-UP
OFF/ON
8 SHUTTLE FERRY
OFF/MODE1/MODE2
9 [DUAL RADAR]
0 NEXT
18
4. FUNCTION KEYS (F1 - F4)
4.1 F1, F2 and F3 Keys
The F1, F2 and F3 keys can be used to automate complex or repetitive tasks. Each
key may be programmed with ten functions. Simply press a key to execute program
assigned.
Operating F1, F2 and F3 keys
The table below shows the default functions of the F1, F2 and F3 keys.
1. Press F1, F2 or F3 key. For example, press the F1 key.
2. Select function desired then push the left button. Programmed function is then exe-
cuted.
3. To continue, repeat step 2.
4. Push the right button to close the menu.
Default functions of F1, F2 and F3 keys
F1 key F2 key F3 key
1. PICTURE 1. OS TRAIL 1. OWN TRACK OFF/ON
2. IR 2. BRILL 2. OWN TRACK COLOR
3. ES 3. DISP ARP 3. TGT TRACK OFF/ON
4. EAV 4. DISP AIS 4. TGT TRACK COLOR
5. PULSE LENGTH 5. DISPLAY SELECT 5. OWN TRACK DISPLAY
6. WIPER 6. ICON DISP 6. TARGET TRACK DISPLAY
7. ECHO AREA 7. PICTURE1 7. GPS BUOY DISPLAY
8. NO FUNCTION 8. PICTURE2 8. MAP MARK COLOR
9. NO FUNCTION 9. PICTURE3 9. DISP WPT NO.
0. NO FUNCTION 0. PICTURE4 0. DISP WPT NAME
[F1 EXECUTE]
1 PICTURE
2 IR
3 ES
4 EAV
5 PULSE
LENGTH
6 WIPER
7 ECHO AREA
8 NO FUNCTION
9 NO FUNCTION
0 NO FUNCTION
19
Programming the F1, F2 and F3 keys
1. Press a function key (F1, F2 or F3) twice. For example, press the F1 key.
2. Select function desired then push the left button. For example, select 1 [PIC-
TURE].
3. Select function desired then push the left button. The corresponding menu
appears. See the next page.
[F1 REGISTER]
1 [PICTURE]
2 [IR]
3 [ES]
4 [EAV]
5 [PULSE
LENGTH]
6 [WIPER]
7 [ECHO
AREA]
8 [NO
FUNCTION]
9 [NO
FUNCTION]
0 [NO
FUNCTION]
[F1-1]
1 BACK
2 [ECHO]
3 [STD
KEY]
4 [ARP
AIS]
5 [OPERATION]
6 [PICTURE]
7 [MARK]
8 [PLOTTER]
9 [NAV
LINE
WPT]
0
NO FUNCTION
20
4. Select "2" then push the left button.
5. Select item to register then push the left button.
6. Push the right button five times to close the menu.
The tables on the next several pages describe the functions available.
[F1-1-ECHO]
1 BACK
2
PICTURE/
IR/
ES/
EAV/
NOISE
REJ/
ANT
SELECT/
PULSE
LENGTH/
A/C
SEA
SELECT/
AUTO
RAIN
SELECT/
TUNE
SELECT/
VIDEO
CONTRAST1/
VIDEO
CONTRAST2/
ANT
HEIGHT/
SEA
CONDITION/
2ND
ECHO REJ/
PM/
SART/
WIPER/
ECHO
AREA
[F1-1-STD KEY]
1 BACK
2
ALARM
ACK/
STBY
TX/
HL
OFF/
MODE/
OFF
CENTER/
CU
TM
RESET/
INDEX
LINE/
VECTOR
TIME/
VECTOR
MODE/
TARGET
LIST/
TRAIL
TIME/
TRAIL
GRAD/
OS
TRAIL/
BRILL/
MENU/
RANGE
UP/
RANGE
DOWN/
ACQ/
TARGET
DATA/
TARGET
CANCEL
[F1-1-ARP
n
AIS]
1 BACK
2
DISP
ARP/
DISP
AIS/
TARGET
DATA&ACQ/
PAST
POSN
INTERVAL/
REF
MARK/
CPA
LIMIT/
CPA/
TCPA/
TARGET
LIST
SORT/
TRIAL
MANEUVER/
ARP
n
AIS
FUSION/
ARP
SYMBOL
COLOR/
ARP
SYMBOL
SIZE/
ARP
PAST
COLOR/
ARP
PAST
POINTS/
AIS
MESSAGE/
AIS
SYMBOL
COLOR/
AIS
SYMBOL
SIZE/
AIS
PAST
COLOR/
AIS
PAST
POINTS/
TRIAL
MODE
CHANGE
[F1-1-OPERATION]
1 BACK
2
ECHO
COLOR/
BACK
COLOR/
RING/
WATCH
ALARM
RESET/
ZOOM/
DISPLAY
SELECT/
RADAR
COMBINE/
MOB/
USER DEFAULT/
TLL/
ANCHOR
WATCH/
COLOR
SHIFT/
ICON
DISP/
OWN
TRK
ALL
ERASE/
TGT TRK ALL ERASE
[F1-1-PICTURE]
1 BACK
2
PICTURE1/
PICTURE2/
PICTURE3/
PICTURE4/
NEAR/
FAR/
NEAR
BUOY/
FAR
BUOY/
ROUGH
SEA/
SHIP/
NEAR
BIRD/
FAR
BIRD
[F1-1-MARK]
1 BACK
2
OWN
SHIP
MARK/
STERN
MARK/
INDEX
LINE/
INDEX
LINE
MODE/
EBL
OFFSET
BASE/
EBL1
BEARING/
EBL2
BEARING/
CURSOR
BEARING/
BARGE
MARK
CURSOR
[F1-1-PLOTTER]
1 BACK
2
CHART
COLOR/
OWN
TRACK
OFF/ON/
OWN
TRACK
COLOR/
TGT
TRACK
OFF/ON/
TGT
TRACK
COLOR/
CURSOR
L/L
ALIGN/
MARK
ALL
ERASE/
WPT
ALL ERASE/
NAV
LINE
ALL
ERASE/
GRID
DISPLAY/
OWN
TRACK
DISPLAY/
TARGET
TRACK
DISPLAY/
MARK
DISPLAY/
LAND
DENSITY
DISPLAY/
PLACE
NAME
DISPLAY/
COAST
LINE
DISPLAY/
CONTOUR
LINE
DISPLAY/
NAV
LINE(MAP)/
DANGER
HIGHLIGHT/
PROHIBITED
AREA
DISP/
BUOY
DISPLAY/
GPS
BUOY
DISPLAY/
TARGET
TRACK
MODE/
MAP
DISPLAY/
MAP
MARK
COLOR
[F1-1-NAV
LINE
n
WPT]
1 BACK
2
NAV
LINE
DATA/
ARRIVAL
WPT
ALARM/
DISP
WPT
NO./
DISP
WPT
NAME/
SKIP
NEXT
WPT/
TURNING
LINE/
DEPTH/
DEPTH
GRAPH
SCALE/
CURRENT/
WIND/
TEMP/
DATE-TIME/
WPT
DATA
21
Functions available with F1-F3 keys: ECHO category
Item Function Settings
PICTURE Select picture setup condition. PICTURE1, PICTURE2, PICTURE3,
PICTURE4, NEAR, FAR, NEAR BUOY,
FAR BUOY, ROUGH SEA, SHIP,
HARBOR
1
, COAST
1
, NEAR BIRD
2
, FAR
BIRD
2
1
10 kW/25 kW
2
50 kW/60 kW
IR Enable/disable interference
rejector.
OFF, 1, 2, 3
ES Enable/disable echo stretch. OFF, 1, 2, 3
EAV Enable/disable echo averaging. OFF, 1, 2, 3
NOISE REJ Enable/disable noise rejector. OFF, ON
ANT SELECT Select antenna unit.
PULSE LENGTH Select pulse length. 10 kW/25 kW models
0.125, 0.25, 0.5 NM: S1
0.75, 1, 1.5, 2 NM: S1, S2, M1
3, 4 NM: S2, M1, M2, M3
6, 8 NM: M1, M2, M3, L
12, 16, 24 NM: M2, M3, L
32, 48, 96, 120 NM: L
50 kW/60 kW models
0.125, 0.25, 0.5 NM: S
0.75, 1, 1.5, 2 NM: S, M1
3, 4 NM: M1, M2
6, 8, 12, 16, 24 NM: M2, L
32, 48, 96, 120 NM: L
A/C SEA SELECT Select A/C SEA adjustment
method.
AUTO, MANUAL
AUTO RAIN SELECT Enable/disable AUTO RAIN. OFF, 1, 2, 3, 4
TUNE SELECT Select tuning method. AUTO, MANUAL
VIDEO CONTRAST1 Set Video Contrast1. 1, 2, 3, 4
VIDEO CONTRAST2 Set Video Contrast2. A, B, C
ANT HEIGHT Select antenna height (above the
waterline).
5, 7.5, 10, 15, 20, 30, 35, 40, 45, more
than 50 (m)
SEA CONDITION Set sea condition. 1, 2, 3, 4, 5
2ND ECHO REJ Enable/disable second-trace
echo rejector.
OFF, ON
PM Enable/disable performance
monitor.
OFF, ON
SART Enable/disable set up for
optimum detection of SART.
OFF, ON
WIPER Enable/disable wiper. OFF, 1, 2
ECHO AREA Select echo area configuration. CIRCLE, WIDE, ALL
22
Functions available with F1-F3 keys: STD KEY category
Item Function Settings
ALARM ACK Silence alarm buzzer.
STBY TX Alternate between standby and
TX.
HL OFF Hide heading line temporarily.
MODE Select presentation mode. Head-up, Cursor gyro, North-up, Course-
up, True motion
OFF CENTER Off center the display.
CU TM RESET Reset position in course-up/true
motion.
INDEX LINE Display index line. IL1, IL2
VECTOR TIME Select vector time. 30 s, 1-5 min (one-minute intervals),
20 min, 30 min, 40 min, 50 min, 60 min
VECTOR MODE Select vector mode. Relative vector, true vector
TARGET LIST Display ARP target list.
TRAIL TIME Select trail time. "Standard" trail length: OFF, 00:15. 00:30,
01:00, 03:00, 06:00, 15:00, 30:00, Contin-
uous
"12h" trail length: OFF, 00:30, 01:00,
03:00, -6:00, 12:00, Continuous
"24h" trail length: OFF, 01:00, 02:00,
03:00, 06:00, 12:00, 18:00, 24:00, Contin-
uous
"48h" trail length: OFF, 02:00, 04:00,
08:00, 16:00, 24:00, 36:00, 48:00, Contin-
uous
TRAIL GRAD Select trail gradation. Single (color), Multi (single color)
OS TRAIL Display/hide other ship’s trail
near your ship.
OFF, 1, 2
BRILL Select display brilliance. 1, 2, 3, 4
MENU Open main menu.
RANGE UP Raise range.
RANGE DOWN Lower range.
ACQ ARP: Acquire target for ARP.
TARGET DATA ARP: Display ARP target data.
AIS: Activate sleeping target.
Display AIS target data.
TARGET CANCEL ARP: Cancel tracking on ARP
target.
AIS: Sleep a target.
23
Functions available with F1-F3 keys: ARP•AIS category
Item Function Settings
DISP ARP Enable/disable ARP display. OFF, MANUAL, AUTO, AUTO/
MANUAL
DISP AIS Show/hide AIS display. OFF, ON
TARGET DATA&ACQ ARP: Acquire ARP target.
Display ARP target data.
AIS: Activated sleeping AIS target.
Display AIS target data.
PAST POSN INTERVAL Select past position interval.
REF MARK Inscribe reference mark.
CPA LIMIT Enable/disable CPA alarm. OFF/ON
CPA Set CPA limit. 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0,
6.0 (nm)
TCPA Set time of closest approach. 1, 2, 3, 4, 5, 6, 12, 15 (min)
TARGET LIST SORT Select target list sort method. CPA, TCPA, BCR, BCT,
DISTANCE, SPEED
TRIAL MANEUVER Start trial maneuver.
ARP
AIS FUSION Enable/disable ARPAIS target fusion.
OFF, ON
ARP SYMBOL COLOR Select ARP symbol color. RED, GREEN, BLUE,
YELLOW, LIGHT-BLUE,
PURPLE
ARP SYMBOL SIZE Select ARP symbol size. SMALL, STANDARD, LARGE
ARP PAST COLOR Select ARP past position color. RED, GREEN, BLUE,
YELLOW, LIGHT-BLUE,
PURPLE
ARP PAST POINTS Set number of ARP past points to show. 5, 10
AIS MESSAGE Show/hide the "you got mail" symbol.
The symbol below appears when an
AIS message arrives.
AIS SYMBOL COLOR Select AIS symbol color. RED, GREEN, BLUE,
YELLOW, LIGHT-BLUE,
PURPLE
AIS SYMBOL SIZE Select AIS symbol size. SMALL, STANDARD, LARGE
AIS PAST COLOR Select ARP past position color. RED, GREEN, BLUE,
YELLOW,
LIGHT-BLUE, PURPLE
AIS PAST POINTS Set number of AIS past points to show. 5, 10
TRIAL MODE CHANGE Select type of trial mode. OFF, STATIC, DYNAMIC
24
Functions available with F1-F3 keys: OPERATION category
Item Function Settings
ECHO COLOR Select echo color. YELLOW, GREEN, WHITE,
MULTI
BACK COLOR Select background color. BLACK(GREEN characters),
BLACK(RED characters),
ECHO BLUE, BLUE, DARK
BLUE
RING Show/hide fixed range rings. OFF, ON
WATCH ALARM RESET Reset watch alarm.
ZOOM Enable/disable zoom.
DISPLAY SELECT Select display mode. RADAR, RADAR+PLOTTER,
PLOTTER
RADAR COMBINE Select dual-range display format. OFF, MIX, COMBINE
MOB Inscribe MOB mark.
USER DEFAULT Restore user defaults for [F1]-[F3].
(When "F-KEY" is selected at USER
DEFAULT in OPERATION (2/2) menu.
1. Set equipment as desired.
2. Display F1, F2 or F3 menu as appli-
cable.
3. Choose USER DEFAULT and long-
push (more than one second) the
left button.
4. To recall a setting, select F1, F2 or
F3 menu as applicable and choose
USER DEFAULTS.
The radar is then set to stand-by and
"USER DEFAULT" appears at the
bottom right corner.
TLL Output cursor-selected radar target’s
position to chart plotter.
ANCHOR WATCH Enable/disable anchor watch. OFF, ON
COLOR SHIFT Change track color according to color
arrangement.
ICON DISP Show/hide on-screen icons.
OWN TRK ALL ERASE Erase all tracks of your ship.
TGT TRK ALL ERASE Erase all tracks of all targets.
Functions available with F1-F3 keys: PICTURE category
Item Function
PICTURE 1 - 4 Select picture setup condition.
NEAR Optimum detection of targets in range of 3 nm or less
FAR Optimum detection of targets in range of 6nm or higher
NEAR BUOY Optimum detection of close-in buoys
FAR BUOY Optimum detection of distant buoys
ROUGH SEA Optimum radar setup in rough seas
SHIP Optimum detection of ships
NEAR BIRD Optimum detection of birds near your ship
FAR BIRD Optimum detection of distant birds
25
Description of functions available with F1-F3 keys: MARK category
Item Function Settings
OWN SHIP MARK Enable/disable your ship mark. OFF, ON
STERN MARK Enable/disable stern mark. OFF, ON
INDEX LINE Select number of index lines to display. 1, 2, 3, 6
INDEX LINE MODE Select index line mode. HORIZONTAL, VERTICAL
EBL OFFSET BASE Select offset EBL reference point. STAB GND, STAB NORTH,
STAB HEAD
EBL1 BEARING Set bearing reference for EBL1. RELATIVE, TRUE
EBL2 BEARING Set bearing reference for EBL2. RELATIVE, TRUE
CURSOR BEARING Set bearing reference for cursor. RELATIVE, TRUE
BARGE MARK Enable/disable barge marks. OFF, ON
CURSOR SHAPE Enable/disable net cursor. OFF, ON
Description of functions available with F1-F3 keys: PLOTTER category
Item Function Settings
CHART COLOR Select chart color. GREEN, YELLOW, LIGHT-
BLUE, ORANGE, GRAY
OWN TRACK OFF/ON HIde/show your ship’s track. OFF, ON
OWN TRACK COLOR Select color of your ship’s track. RED, GREEN, YELLOW,
LIGHT-BLUE, PURPLE,
WHITE
TGT TRACK OFF/ON Hide/show tracks of targets. OFF, 10 s, 30 s, 1 min, 3 min,
6 min, 15 min
TGT TRACK COLOR Select color for target tracks. RED, GREEN, YELLOW,
LIGHT-BLUE, PURPLE,
WHITE
CURSOR L/L ALIGN Enable/disable L/L alignment w/cursor. OFF, ON
MARK ALL ERASE Erase all marks.
WPT ALL ERASE Erase all waypoints.
NAV LINE ALL ERASE Erase all nav lines.
GRID DISPLAY Show/hide grid. OFF, L/L
OWN TRACK DISPLAY Show/hide your track. OFF, ON
TARGET TRACK
DISPLAY
Show/hide targets’ track. OFF, ON
MARK DISPLAY Show/hide all marks. OFF, ON
LAND DENSITY
DISPLAY
Fill/hollow land on chart. OFF, ON
PLACE NAME DISPLAY Show/hide geographic names. OFF, ON
COAST LINE DISPLAY Show/hide coastlines. OFF, ON
CONTOUR LINE
DISPLAY
Show/hide depth contour lines. OFF, ON, DEPTH(value)
NAV LINE(MAP) Show/hide nav lines. OFF/ON
26
DANGER HIGHLIGHT Show/hide danger highlights OFF, ON
PROHIBITED AREA
DISP
Show/hide prohibited areas. OFF, ON
BUOY DISPLAY Show/hide buoys. OFF, ON
GPS BUOY DISPLAY Show/hide GPS buoys. OFF, ON
TARGET TRACK MODE Select target track color assignment
method.
ALL, INDIVIDUAL
MAP DISPLAY Show/hide radar map. OFF, ON
MAP MARK COLOR Select map mark color RED, GREEN, BLUE,
YELLOW, LIGHT-BLUE,
PURPLE, WHITE
Description of functions available with F1-F3 keys: NAV LINE•WPT category
Item Function Settings
NAV LINE DATA Show/hide nav line data. OFF, EXTERNAL,
INTERNAL, WAYPOINT
ARRIVAL WPT ALARM Enable/disable arrival waypoint alarm. OFF, ON
DISP WPT NO. Show/hide waypoint number. OFF, ON
DISP WPT NAME Show/hide waypoint name OFF, ON
SKIP NEXT WPT Skip next waypoint in a route.
TURNING LINE Show/hide turning line. OFF, ON, REVISED
DEPTH Show/hide depth indication. OFF, m, ft
DEPTH GRAPH SCALE Select graph scale. 10, 20, 50, 100, 200, 500
(m)
CURRENT Show/hide current data. OFF, ON
WIND Show/hide wind indication; select unit of
measurement.
OFF, m/s, KT
TEMP Show/hide water temperature data. OFF, ON
DATE-TIME Show/hide date-time indication; select
time format.
OFF, UTC, LOCAL
WPT DATA Show/hide waypoint data; select waypoint
display format.
OFF, RELATIVE, TRUE
Description of functions available with F1-F3 keys: PLOTTER category
Item Function Settings
27
4.2 Operating the F4 Key
The F4 key is a user-programmable macro key for automating complex or repetitive
tasks. The user may program this key with as many as ten functions.
Registering a program to the F4 key
1. Press the F4 key twice to show the F4 REGIS-
TER menu. (Each press of the key displays the
F4-REGISTER and F4 EXECUTION menus
alternately.)
2. Select the number to register then push the left
button. For example, select "1" and the F4-1
menu appears.
3. Select 2 TITLE then push the left
button. A keyboard appears.
4. Use the keyboard to enter program
title, using up to 15 alphanumeric
characters.
1) Place the cursor on a desired
character.
2) Push the left button. Chosen char-
acter appears below TITLE in the
menu. Numeric and alphabet may
be directly entered from keyboard-
equipped control unit.
3) Repeat steps 1 and 2 to complete
the title.
4) Finally, place the cursor on END
then push the left button.
5. Select 3 OPERATION then push the left button. The message "MACRO
RECORDING" PRESS F4 KEY TO END RECORDING." appears at the lower
right-hand corner on the screen.
6. Operate the equipment to select setting content (max. 20 steps). For example, set
the range for 16 nm, interference rejector for 3 and echo averaging for 2. The
method for counting steps depends on the content of the step as follows:
Main menu, box menu: Each setting counts as one step. For example, if you set
20 items, that counts as 20 steps.
Note: When you reach 20 steps the message disappears and the macro recording
mode ends. If you could not record all the steps you require, do step 5 again,
staying within 20 steps.
7. After setting the equipment as desired, press the F4 key.
8. Select 4 SAVE then push the left button.
9. Select YES then push the left button.
10.Push the right button four times to close the menu.
[F4 REGISTER]
1 [
]
2 [
]
3 [
]
4 [
]
5 [
]
6 [
]
7 [
]
8 [
]
9 [
]
0 [
]
[F4-1]
1 BACK
2 TITLE
3 OPERATION
4 SAVE
NO/YES
1 2 3 4 5 6 7 8 9 0 BS
Q
W
E R T Y U I O P -
A S D F G H J K L +
Z X C V B N M
, .
?
"
# / END
Keyboard
28
Menu functions recordable to F4 key
[ECHO] menu (main menu) [FUSION] menu (main menu)
2ND ECHO REJ FUSION TARGET
PM GAP
SART RANGE
WIPER BEARING
ECHO AREA SPEED
[MARK] menu (main menu) COURSE
OWN SHIP MARK
[PLOTTER] menu (main menu)
STERN MARK CHART COLOR
INDEX LINE BEARING CURSOR L/L ALIGN
INDEX LINE
[OWN TRACK] menu (main menu)
INDEX LINE MODE TRACK INTERVAL
EBL OFFSET BASE POINT TRACK COLOR
RING
[TGT TRACK] menu (main menu)
[BARGE MARK] menu (main menu) TRACK INTERVAL
BARGE MARK TRACK COLOR MODE
BARGE SIZE TRACK COLOR MODE
ARRANGEMENT AUTO TARGET TRACK
[EBL, VRM, CURSOR SET] menu (main menu)
[DISPLAY] menu (main menu)
EBL1 GRID
EBL2 OWN TRACK
CURSOR BEARING TARGET TRACK
[CURSOR SHAPE] menu (main menu) MARK
CURSOR LAND DENSITY
FRONT HALF LENGTH PLACE NAME
REAR HALF LENGTH COAST LINE
NET WIDTH CONTOUR LINE
ROTATE STEP NAVLINE(MAP)
[ARP/AIS] menu (main menu) DANGER HIGHLIGHT
AIS DISPLAY PROHIBITED AREA
[ARP SYMBOL] menu (main menu) [GPS BUOY] menu (main menu)
ARP SYMBOL COLOR GPS BUOY
ARP SYMBOL SIZE [NAV DATA] menu (main menu)
PAST POSN COLOR DEPTH
PAST POSN POINTS DEPTH GRAPH SCALE
[AIS SYMBOL] menu (main menu) DEPTH MARK
AIS SYMBOL COLOR CURRENT
AIS SYMBOL SIZE WIND
ROT TAG LIMIT TEMP
PAST POSN COLOR DATE-TIME
PAST POSN POINTS LOCAL TIME
WPT DATA
29
Menu functions recordable to F4 key
[NAV LINE/WPT] menu (main menu) [MARK] menu (box menu)
NAV LINE DATA SOURCE MARK POSN (mark entry method)
NAV LINE WIDTH MAP DISPLAY
ARRIVAL WPT ALARM MAP MARK COLOR
TURNING LINE
[BRILL] menu (box menu)
DISP WPT NO. ECHO COLOR
DISP WPT NAME BKGD COLOR
[DATA BOX] menu (main menu) [TRAIL] menu (box menu)
NAV DATA TRAIL MODE
ZOOM TRAIL GRAD
[PICTURE] menu (box menu) NARROW TRAIL
INT REJECT TRAIL LEVEL
ECHO STRETCH TRAIL RESTART
ECHO AVERAGE TRAIL COPY
NOISE REJ OS TRAIL
AUTO STC TRAIL LENGTH
AUTO RAIN TRAIL HIDE
VIDEO CONTRAST
[ARPA] menu (box menu)
[PULSE] menu (box menu) ARPA ON/OFF
Pulse length selection
[CONDITION] menu (in PICTURE menu
(box menu))
SEA CONDITION
ANT HEIGHT
COLOR ERASE
Functions recordable to the F4 key
Key
ALARM ACK
MODE SELECTION
OFF CENTER
CU\TM RESET
INDEX LINE
VECTOR TIME
VECTOR MODE (Relative/True)
TRAIL ERASE
BRILL
RANGE
30
Operating the F4 key
1. Press the F4 key to show the F4 EXECUTION menu.
2. Select the program to execute then push the left button.
3. Push the right button to close the menu.
On-screen box operations recordable to the F4 key
DISPLAY MODE box TRUE/REL VECTOR box
Select display mode. Select vector reference.
ANTENNA box ARP box
Select antenna. Turn ARP on/off.
PRESENTATION MODE box AIS box
Select presentation mode. Turn AIS on/off.
PICTURE box CPA ALARM box
Adjust radar picture. Enable/disable CPA alarm.
RANGE box CPA LIMIT box
Select display range. Set CPA limit.
TRAIL MODE box TCPA LIMIT box
Select echo trail time. Set TCPA limit.
ARP VECTOR box
Select ARP vector length.
[F4 EXECUTION]
1 BUOY
2 DISTANT
TARGET
3
4
5
6
7
8
9
0
31
5. ANCHOR WATCH ALARM
The anchor watch alarm informs you when your boat is moving when it should be at
rest. When the anchor watch is active, a red dashed circle marks the anchor watch
area.
1. Left-click the MENU box.
2. Select 3 [ALARM] then push the left button.
3. Select 0 ANCHOR WATCH ALARM then push the left button.
4. Select ON then push the left button.
5. Use the scrollwheel to set alarm radius, from 0.00 to 9.99 (nm). Spin the scroll-
wheel to set then push it to confirm.
6. Push the right button twice to close the menu.
When your ship moves a distance more than the anchor watch setting, the buzzer
sounds and the indication ANCHOR WATCH appears at the bottom right corner.
To disable the alarm, select OFF at step 4 then push the right button twice to close the
menu.
Setting
range
: Alarm area
Own ship
position
[ALARM]
1 BACK
2 TARGET ALARM MODE
IN/OUT
3 TARGET ALARM LEVEL
1/2/3/4
4 WATCH ALARM
OFF/6M/10M/
12M/15M/20M
5 ALARM SOUND LEVEL
OFF/LOW/MID/HIGH
6 [ALARM OUT1]
7 [ALARM OUT2]
8 [ALARM OUT3]
9 [ALARM OUT4]
0 ANCHOR WATCH
OFF/ON
0.00NM
32
6. VIDEO PLOTTER FUNCTIONS
The fishing specification radar has three operating modes: radar, radar plus plotter,
and plotter.
6.1 Depth Contour with Depth Indication
Depth indication can be shown on depth contours.
1. Left-click the MENU box.
2. Select 5 [PLOTTER] then push the left button.
3. Select 7 [DISPLAY] then push the left button.
4. Select 9 CONTOUR LINE then push the left button.
5. Select DEPTH then push the left button to show depth indication on the depth con-
tours.
6. Push the right button three times to close the menu.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
10m
5m
2m
Depth
contour
Depth
indication
[DISPLAY (1/2)]
1 BACK
2 GRID
OFF/L/L
3 OWN TRACK
OFF/ON
4 TARGET TRACK
OFF/ON
5 MARK
OFF/ON
6 LAND DENSITY
OFF/ON
7 PLACE NAME
OFF/ON
8 COAST LINE
OFF/ON
9 CONTOUR LINE
OFF/ON/DEPTH
0 NEXT
33
6.2 Mark Settings
You can enter a mark to denote a reef, fishing ground, navigation buoy. The position
of a mark is saved at the time of entry. The radar can store up 20,000 marks and lines.
This section shows you how to enter mark comment, and change its position and
color.
Enabling, disabling mark comment input and mark position
editing
1. Use the trackball to put the cursor on the arrow in the MARK box at the bottom left-
hand corner.
2. Push the right button to show the MARK (1/2) menu.
3. Select 4 MARK COMMENT then push the left button.
4. Spin the scrollwheel to select OFF or ON as applicable then push the left button.
OFF to disable mark comment entry, ON to enable it.
5. Select 5 MARK L/L EDIT then push the left button.
6. Select OFF or ON as applicable. OFF to disable mark editing, ON to enable it.
7. Push the right button to close the menu.
MARK
[MARK MENU (1/2)]
1 ORIGIN MARK STAB
GND/SEA
2 MARK KIND
ORIGIN MARK(No. )/
ORIGIN MARK(SYM)/
MAP MARK/
WP 1~50/
WP 51~ 100/
WP 101~150/
WP 151~ 200/
OWN SHIP SHAPE
3 MARK POSN
CURSOR/OS/L/L
4 MARK COMMENT
OFF/ON
5 MARK L/L EDIT*
OFF/ON
0 NEXT
MARK
0/20000
OWN TRACK
0/20000
TGT TRACK
0/20000
* Available when 3 MARK POSN is set
for CURSOR or OS.
34
Entering mark comment, changing mark position
Mark comments can be entered and mark position changed when MARK COMMENT
and MARK L/L EDIT are set to ON.
To show mark comments MAP DISPLAY on page 2 of the MARK menu must be set
to ON.
1. Use the trackball to put the cursor on the arrow in the MARK box at the bottom left-
hand corner.
2. Spin the scrollwheel to select desired mark then push the left button.
3. Put the cursor on the location where you want to enter a mark then push the left
button.
The location is circumscribed with a broken rectangle and the MARK ENTRY
menu (1/2) appears. If 3 MARK POSN on the MARK ENTRY menu (1/2) is
selected to OS (Own Ship), the broken rectangle appears at current position.
4. Select 1 COMMENT then push the left button.
5. Use the on-screen keyboard to enter comment, following the instructions below.
You may enter up to eight alphanumeric characters.
1) Place the cursor on a desired character.
2) Push the left button. Chosen character appears below TITLE in the menu. Numeric
and alphabet may be directly entered from keyboard-equipped control unit.
3) Repeat steps 1 and 2 to complete the title.
4) Finally, place the cursor on END then push the left button.
MARK
Mark
RED
Current mark colo
r
[MARK PUT]
1 COMMENT*
2 POSITION**
34
°
44.44 N
135
°
21.20 E
3 CONFIRM
1 2 3 4 5 6 7 8 9 0 BS
*: Available when MARK
COMMENT is ON.
**: Available
when MARK L/L
EDIT is ON.
[MARK PUT]
1 COMMENT
2 POSITION
34
°44.44 N
135
°21.20 E
3 CONFIRM
1 2 3 4 5 6 7 8 9 0 BS
Q
W
E R T Y U I O P -
A S D F G H J K L +
Z X C V B N M
, .
?
"
# / END
Input cursor
35
6. To edit mark position, select 2 POSITION then push the left button.
7. Spin the scrollwheel to select numeric. Numeric may also be directly entered in
case of keyboard-equipped control unit. After setting position, the values entered
are colored blue.
8. Select 3 CONFIRM then push the left button.
The comment entered is placed next to on-screen mark. If the position of the mark
was changed mark appears at the newly entered position.
9. Push the right button to finish.
Selecting mark color
Mark color is available in red, green, blue, yellow, cyan (light-blue), magenta, and
white.
1. Use the trackball to put the cursor on the arrow in the MARK box at the bottom left-
hand corner.
2. Push the right button to show the MARK (1/2) menu.
3. Spin the scrollwheel to select 0 NEXT then push the left button.
4. Select 3 MAP MARK COLOR then push the left button.
5. Spin the scrollwheel to select color desired then push the left button. Selected color
appears below the MARK box.
6. Push the right button twice to close the menu.
All marks entered after changing mark color will be colored in the newly selected color.
[MARK MENU(2/2)]
1 BACK
2 MAP DISPLAY
OFF/ON
3 MAP MARK COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
36
6.3 Track Settings
This section provides the procedures for how to select track recording parameters,
select track color, and erase track.
Track recording interval
This radar can store 20,000 points of your track and 15,000 points of target tracks
(1,000 points/target). The shorter the recording interval the smoother the track is
drawn, however the recording time is greatly shortened. When the capacity for track
is reached, the oldest track is erased to make room for the latest.
1. Place the cursor in the MENU box then push the left button.
2. Select [5 PLOTTER] then push the scrollwheel.
3. Spin the scrollwheel to select [3 OWN TRACK] or [4 TGT TRACK] as appropriate
then push the left button.
4. Spin the scrollwheel to select 2 TRACK INTERVAL then push the left button.
5. Select option desired then push the left button.
Select OFF to stop recording track. To show track on the display but don’t record
it, select DRAW.
6. Push the right button three times to close the menu.
[PLOTTER]
1 BACK
2 CHART COLOR
GRN/YEL/CYA/
ORANGE/GRAY
3 [OWN TRACK]
4 [TGT TRACK]
5 CURSOR L/L ALIGN
OFF/ON
6 [DATA ERASE]
7 [DISPLAY]
8 [GPS BUOY]
[OWN TRACK]
1 BACK
2 TRACK INTERVAL
OFF/DRAW/10S/30S/
1M/2M/3M/6M/15M
3 TRACK COLOR
RED/ORG/GRN/BLU/YEL/
CYA/MAG/WHT
[TGT TRACK]
1 BACK
2 TRACK INTERVAL
OFF/DRAW/10S/30S/
1M/2M/3M/6M/15M
3 TRACK COLOR MODE
ALL/INDIVIDUAL
4 TRACK COLOR
RED/ORG/GRN/BLU/YEL/
CYA/MAG/WHT
5 AUTO TARGET TRACK
OFF/ON
37
Changing track color
Track can be colored red, green, blue, yellow. cyan, magenta, and white. It can be
useful to change the color of ship’s track to clearly differentiate past track from current
track.
Changing the color of your ship’s track
1. Place the cursor in the MENU box then push the left button.
2. Select [5 PLOTTER] then push the left button.
3. Select [3 OWN TRACK] then push the left button.
4. Select [3 TRACK COLOR] then push the left button.
5. Select color desired then push the left button.
6. Push the right button three times to close the menu.
Changing the color of target tracks
1. Put the cursor in the track color selection box at the bottom of the screen.
2. Long-push the left button to select track color changing format (ALL or
IND(ividual).
IND: Change color of specific target’s track.
ALL: Change color of all target tracks.
3. Push the left button to select color. The color selection changes cyclically in the
order of red, blue, green, light-blue, magenta, white, red... .
The color of target tracks can be automatically changed as shown in the table, by set-
ting turning on 5 AUTO TARGET TRACK in the TGT TRACK menu.
TGT TRK
IND/RED
TGT TRK
ALL/RED
Long-push
left button
38
*: You can switch between TARGET TRACK ON (display target tracks) and TARGET
TRACK OFF (don’t display target tracks) as follows:
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show TARGET TRACK ON or TARGET TRACK OFF at the
bottom of the screen.
3. Put the cursor on the track that you want to display (or turn off) then push the left
button.
4. Push the right button to finish.
AUTO TARGET TRACK status and track color
AUTO TARGET TRACK "ON" AUTO TARGET TRACK "OFF"
ALL When track is drawn
When a target is acquired its track is
drawn in the color specified.
When track is drawn
Manually acquire a target. The track of a
manually acquired target is drawn in the
color specified if the target selected by
using the TARGET TRACK ON* feature.
When color is changed
The color of all track is changed at the
moment new color is selected.
When color is changed
The color of all track is changed at the
moment new color is selected.
INDIVIDUAL When track is drawn
When a target is acquired it is drawn in
the color specified. To change track color
for individual target, select a different
color and acquire the target.
When track is drawn
Manually acquire a target. The track of a
manually acquired target is drawn in the
color specified if the target selected by the
TARGET TRACK ON* feature. To change
track color of individual target and acquire
the target by using the TARGET TRACK
ON* feature.
When color is changed
Current track is not affected when color
is changed. To change track color, select
color desired and cancel tracking of
target. Reacquire the target, and its track
is then drawn in the color specified.
Note: When 5 AUTO TARGET TRACK is
switched from ON to OFF, track display is
turned off from the moment of switching.
If AUTO TARGET TRACK is again
switched ON when INDIVIDUAL is
active, the tracks of all targets (1-15) are
displayed in the color specified.
When color is changed
Current track is not affected when color is
changed. To change track color, select
desired color and turn off the track of the
target by using the TARGET TRACK
OFF* feature. Select the target by using
the TARGET TRACK ON feature, and the
target’s track is drawn in the color speci-
fied.
TARGET
TRACK ON
EXIT
TARGET
TRACK OFF
EXIT
39
Erasing track with the cursor
You may erase your ship’s track or any target’s track directly on the screen, by two
points or area. Select the erasure method then erase track.
Selecting erasure method
Select the erasure method for own track and target track as follows:
1. Left-click the MENU box.
2. Select 5 [PLOTTER] then push the left button.
3. Select 8 [DATA ERASE] then push the left button.
4. Select 7 OWN TRACK DELETE or 8 TARGET TRACK DELETE then push the left
button.
5. Select 2POINTS or AREA as appropriate then push the left button.
2POINTS:Erase track between two points.
AREA: Erase all track within an area.
6. Push the right button three times to close the menu.
Erase track between two points
x: Specified point
Erase track within a specific range
Desired location
1 BACK
2 OWN TRACK
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
3 TARGET TRACK
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
4 MARK ALL ERASE
NO/YES
5 WPT ALL ERASE
NO/YES
6 NAV LINE ALL ERASE
NO/YES
7 OWN TRACK DELETE
2POINTS/AREA
8 TARGET TRACK DELETE
2POINTS/AREA
[DATA ERASE]
40
Erasing track between two points, area
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show OWN TRACK DELETE/EXIT or TGT TRACK
DELETE/EXIT in the guidance box at the bottom right-hand corner on the screen,
whichever track you want to erase.
3. Use the trackball to place the cursor at the top-left corner of the area (or 1st point
in case of erasure by two points) then push the left button.
4. Use the trackball to drag the cursor at the bottom-right corner of the area (or 2nd
point in case of erasure by two points). If the erasure method (chosen on the pre-
vious page) is "AREA", a rectangle appears when you start dragging the cursor.
5. Push the left button to erase track.
6. Push the right button to quit.
Note that this function is automatically canceled if there is no erasure occurring in 30
seconds.
Erasing all track of a target
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show TGT TRACK DELETE/EXIT in
the guidance box at the bottom right-hand corner on the
screen.
3. Use the trackball to put the cursor on the track you want to erase then push the left
button to erase track.
4. Push the right button to quit.
Automatically displaying other target tracks
The tracks of 15 acquired targets (numbered 1-15) may be automatically displayed.
When the lost target alarm sounds for a lost target, the number of that target is auto-
matically reused when another target is acquired.
1. Right-click the MENU box.
2. Select 5 [PLOTTER] then push the left button.
3. Select 0 AUTO TARGET TRACK then push the left button.
4. Select ON then push the left button.
5. Push the right button twice to close the menu. To display the track of a specific
target, turn off AUTO TARGET TRACK and do the following:
1) In the PLOTTER menu, set 5 TGT TRACK INTERVAL to other than OFF.
2) Place the cursor inside the effective display area.
3) Spin the scrollwheel to show TARGET TRACK ON /
EXIT in the guidance box.
4) Place the cursor on the target for which you want to
show its track then push the left button.
5) Push the right button to finish.
OWN TRACK
DELETE
EXIT TGT TRACK
DELETE
EXIT
TGT TRACK
DELETE
EXIT
TARGET
TRACK ON
EXIT
41
6.4 GPS Buoy
With connection of a GPS radio buoy locator, the information (GPS buoy marker and
GPS buoy track) for up to seven GPS buoys may be shown on the radar screen. One
application of a GPS buoy is to tether it to a fishing net to monitor net position. Each
track may contain up to 20 track points. Marker color is available in red, green, blue,
yellow, light-blue, magenta and white.
Enabling, disabling GPS buoy information
1. Select the MENU box at the right side of the screen then push the left button.
2. Select [5 PLOTTER] then push the left button.
3. Select [8 GPS BUOY] then push the left button.
4. Select 2 GPS BUOY then push the left button.
5. Select ON or OFF as appropriate then push the left button.
6. Push the right button three times to close the menu.
Erasing all tracks of GPS buoys
1. Select the MENU box at the right side of the screen then push the left button.
2. Select [5 PLOTTER] then push the left button.
3. Select [8 GPS BUOY] then push the left button.
4. Select 3 ALL TRACK ERASE then push the left button.
5. Select YES then push the left button.
6. Push the right button three times to close the menu.
6
HEAD UP TB RM
MENU
ANT 1 X-BAND
PULSE S1
PICTURE4
IR OFF
ES OFF
EAV OFF
AUTO RAIN
OFF
NM
/1
DISPLAY
RADAR
GAIN
SEA AUTO
RAIN
TUNE AUTO
0. 9ktDRIFT
000. 0°TSET
34°40. 649 N
135°18. 303 E
+
TAR GET
LIST
CU/TM
RESET
ALARM
ACK
GZ1
IL1
MARK
032. 0°T
RED
+
BRILL1
HL
OFF
EBL1
>280.9°T<
EBL2
240. 8°R
TX
STBY
5. 60NM
ON
GZ2
ALARM1
ALARM2
VRM1
>3.682NM<
VRM2
5.221NM
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
TRUE TRAIL OFF
25
22
19
ALIGN
26
TRIAL OFF
REF POINT
ANT POSN
01
02
GPS buoy
marker
GPS buoy
track
GPS buoy no.
TGT TRK
IND/MAG
1 BACK
2 GPS BUOY
OFF/ON
3 ALL TRACK ERASE
NO/YES
[GPS
BUOY]
42
7. ARP SYMBOLS
The ARP symbol is available in the 10 shapes shown in the illustration below. You can
select shape desired as follows:
1. Select target with trackball.
2. Press the TARGET DATA key repeatedly to select symbol desired.
Note: If you are using the trackball-type control unit (RCU-015, RCU-016), ARP
symbol shape cannot be chosen by the above procedure. However, you can program
a function key to do so, with the combination of the "STD KEY" category and the option
"TARGET DATA." For how to program a function key, see section 4.1.2.
43
8. DISPLAYING PICTURE FROM
EXTERNAL RADAR
The picture from an external radar connected to the SUB DISPLAY termina can be
displayed on the FAR-2xx7 series display.
1. Use the trackball to set the pointer on the triangle in the ANTENNA box at the
upper left corner on the display.
2. Right click to show the ANT INFORMATION menu.
3. Select 8 SUB MONITOR then push the left button.
4. Select ON then push the left button.
5. Push the right button to close the menu.
6. Set the pointer on triangle in the ANTENNA box, and left-click several times to dis-
play SUB MONITOR to show the picture from the external radar.
ANT2 X-BAND
[ANT INFORMATION]
ANT NO 1
BAND : X-BAND
MODEL : 12
POS : MAIN TOP
ANT NO 2
BAND : X-BAND
MODEL : 12
POS : FORE
ANT NO 3
BAND :
MODEL :
POS :
ANT NO 4
BAND :
MODEL :
POS :
OWN RADAR NO: 1
8 SUB MONITOR
OFF/ON
9 INTER SW PRIORITY
OFF/ON
44
9. MENU OVERVIEW
Menu tree
1 BACK
2 TARGET ALARM MODE (IN, OUT)
3 TARGET ALARM LEVEL (1, 2, 3, 4)
4 WATCH ALARM (OFF, 6M, 10M, 12M, 15M, 20M)
5 ALARM SOUND LEVEL (OFF, LOW, MID, HIGH)
6 [ALARM OUT1]
7 [ALARM OUT2]
8 [ALARM OUT3]
9 [ALARM OUT4]
0 ANCHOR WATCH
(OFF, ON)
(0.00-9.99(NM))
1 BACK
2 2ND ECHO REJ (OFF, ON)
3 TUNE INITIALIZE
4 PM (OFF, ON)*
1
5 SART (OFF, ON)
6 WIPER (OFF, 1, 2)
7 ECHO AREA (CIRCLE, WIDE, ALL)
8 PICTURE SELECT
MENU key
or
MENU box
1 BACK
2 EBL1 (REL, TRUE)
3 EBL2 (REL, TRUE)
4 VRM1 (NM, SM, km, kyd)
5 VRM2 (NM, SM, km, kyd)
6 CURSOR BEARING (REL, TRUE)
7 CURSOR RANGE (NM, SM, km, kyd)
8 [ CURSOR SHAPE]
9 CURSOR BRG
SCALE (360°,
32 POINTS)
1 BACK
2 OWN SHIP MARK (OFF, ON)
3 STERN MARK (OFF, ON)
4 INDEX LINE BEARING (REL, TRUE)
5 INDEX LINE (1, 2, 3, 6)
6 INDEX LINE MODE (VERTICAL, HORIZONTAL)*
2
7 [BARGE MARK]*
3
8 EBL OFFSET BASE POINT (STAB GND, STAB HDG, STAB NORTH)
9 [EBL, VRM, CURSOR SET]
0 RING (OFF, ON)
1 BACK
2 CURSOR (OFF, ON)
3 FRONT HALF LENGTH
4 REAR HALF LENGTH
5 NET WIDTH
6 ROTATE STEP
(360
°, 32 POINTS)
1 [ECHO]
2 [MARK]
3 [ALARM]
(Continued on next page)
1 BACK
2 (TARGET ALARM, WATCH ALARM,
GUARD ZONE, LOST TARGET, CPA
LIMIT, AUTO ACQ TGT FULL,
MAN ACQ TGT FULL, ARP
SYSTEM ERROR, AZIMUTH, HEAD
LINE, TRIGGER, VIDEO, GYRO, LOG,
EPFS, XTE, ARRIVAL WPT, DEPTH,
ALARM ACK OUT, OPERATOR FITNESS)
9 ALARM OUT POLARITY (NORMAL, INVERT)
*
1
Not available on FAR-2157 or FAR-2167DS.
*
2
Appears when 5 INDEX LINE is set for other than "1".
*
3
When BARGE MARK is disabled, INS MARK menu appears.
1 BACK
2 BARGE MARK (OFF, ON)
3 BARGE SIZE (LENGTH and WIDTH)
4 ARRANGEMENT
1 BACK
2 USER CHART (OFF, ON)
3 CURVED EBL (OFF, ON)
4 CHART SYMBOL (OFF, ON)
5 NOTE BOOK (OFF, ON, DISPLAY)
6 ROUTE (OFF, CENT, ALL)
7 PREDICTOR (OFF, ON)
INS MARK
1 BACK
2 PICTURE SELECT#
(PICTURE 1, PICTURE 2,
PICTURE 3, PICTURE 4,
NEAR, FAR, NEAR BUOY,
FAR BUOY, ROUGH SEA,
SHIP, NEAR BIRD,
FAR BIRD)
# Turn OFF/ON item.
45
4 [ARP
AIS]
5 [PLOTTER]
1 BACK
2 GUARD ZONE STAB (STAB HDG, STAB NORTH)
3 GUARD POLYGON (OFF, STAB GND, STAB HDG, STAB NORTH)
4 [TRIAL MANEUVER]
5 [ARP SYMBOL]
6 [AIS SYMBOL]
7 [FUSION]
8 AIS FUNCTION (OFF, ON)
9 AIS LOST ALARM (ACTIVATED TARGET, ALL TARGET, RANGE 0-99 nm)
0 AIS CPA AUDIO ALARM (ALL TARGET, IGNORE TARGET 0.0-9.9kt))
1 BACK
2 TRIAL (OFF, STATIC, DYNAMIC)
3 TRIAL SPEED RATE (0-99 kt, 0.00-9.99 kt/s, two sets)
4 TRIAL TURN RATE (0-99 kt, 0.00-99.99 kt/s, two sets)
5 TRIAL TGT DATA (ACTUAL, TRIAL)
1 BACK
2 ARP SYMBOL COLOR (RED, GRN, BLU, YEL,
CYA, MAG, WHT)
3 ARP SYMBOL SIZE (SMALL, STD, LARGE)
4 PAST POSN COLOR (RED, GRN, BLU,
YEL, CYA, MAG, WHT)
5 PAST POSN POINTS (5, 10)
1 BACK
2 AIS SYMBOL COLOR (RED, GRN, BLU, YEL,
CYA, MAG, WHT)
3 AIS SYMBOL SIZE (SMALL, STD, LARGE)
4 ROT TAG LIMIT (0 - 359°/MIN)
5 PAST POSN COLOR (RED, GRN, BLU,
YEL, CYA, MAG, WHT)
6 PAST POSN POINTS (5, 10)
1 BACK
2 FUSION TARGET (OFF, ON)
3 GAP (0.000 - 9.999 (NM))
4 RANGE (0.000 - 9.999 (NM))
5 BEARING (0 - 9.9°)
6 SPEED (0.0 - 9.9 (kt))
7 COURSE (0 - 359°)
1 BACK
2 CHART COLOR (GRN, YEL, CYA, ORANGE, GRAY)
3 [OWN TRACK]
4 [TARGET TRACK]
5 CURSOR L/L ALIGN (OFF, ON)
6 [DATA ERASE]
(Continued on next page)
(Continued from previous page)
1 BACK
2 OWN TRACK (RED, GRN, BLU, YEL, CYA, MAG,
WHT, 30%, 50%, 80%, ALL)
3 TARGET TRACK (RED, GRN, BLU, YEL, CYA, MAG,
WHT, 30%, 50%, 80%, ALL)
4 MARK ALL ERASE (NO, YES)
5 WPT ALL ERASE (NO, YES)
6 NAV LINE ALL ERASE (NO, YES)
7 OWN TRACK DELETE (2POINTS, AREA)
8 TARGET TRACK DELETE (2POINTS, AREA)
1 BACK
2 TRACK INTERVAL (OFF, DRAW, 10S, 30S, 1M,
2M, 3M, 6M, 15M)
3 TRACK COLOR (RED, GRN, BLU, YEL, CYA, MAG, WHT)
1 BACK
2 TRACK INTERVAL (OFF, DRAW, 10S, 30S, 1M,
2M, 3M, 6M, 15M)
3 TRACK COLOR MODE (ALL, INDIVIDUAL)
4 TRACK COLOR (RED, GRN, BLU, YEL, CYA, MAG, WHT)
5 AUTO TARGET TRACK (OFF, ON)
46
7 [DISPLAY]
8 [GPS BUOY]
1 BACK
2 GRID (OFF, L/L)
3 OWN TRACK (OFF, ON)
4 TARGET TRACK (OFF, ON)
5 MARK (OFF, ON)
6 LAND DENSITY (OFF, ON)
7 PLACE NAME (OFF, ON)
8 COAST LINE (OFF, ON)
9 CONTOUR LINE (OFF, ON, DEPTH)
0 NEXT
1 BACK
2 NAV LINE(MAP) (OFF, ON)
3 DANGER HIGHLIGHT (OFF, ON)
4 PROHIBITED AREA (OFF, ON)
5 BUOY (OFF, ON)
(Continued on next page)
(Continued from previous page)
6 [CARD]
7 [NAV DATA]
8 [NAV LINE
WPT]
1 BACK
2 DRIVE SELECT
3 READ CARD
4 WR MARK
5 WR NAV LINE
WPT
6 WR OWN TRACK
7 WR TARGET TRACK
8 WR SETTING DATA
9 WR INSTALL DATA
0 NEXT
1 BACK
2 FILE DELETE
3 CARD INITIALIZE
1 BACK
2 DEPTH (OFF, m, ft)
3 DEPTH GRAPH SCALE (10, 20, 50, 100, 200, 500)
4 DEPTH MARK (000 - 500)
5 CURRENT (OFF, ON)
6 WIND (OFF, m/s, KT)
7 TEMP (OFF, ON)
8 DATE-TIME (OFF, UTC, LOCAL)
9 LOCAL TIME ADJ (00:00 - +13:30)
0 WPT DATA (OFF, REL, TRUE)
1 BACK
2 NAV LINE DATA (OFF, EXT DATA, INTERNAL DATA, WPT MARK)
3 NAV LINE SELECT (Enter nav line no., FORWARD, REVERSE)
4 SKIP NEXT WPT
5 NAV LINE WIDTH (0.00 - 9.99 (NM))
6 [WPT SET]
1 BACK
2 WPT NO. SELECT
3 WPT NAME
4 WPT L/L
5 CLEAR DATA (NO, YES)
1 BACK
2 GPS BUOY (OFF, ON)
3 ALL TRACK ERASE (NO, YES)
47
7 [WPT LIST]
8 [NAV LINE SET]
9 [NAV LINE LIST]
0 NEXT
(Continued on next page)
(Continued from previous page)
9 [CUSTOMIZE
TEST]
1 BACK
2 [DATA BOX]
3 [F1]
4 [F2]
5 [F3]
1 BACK
2 NAV LINE NO. SELECT
3 NAV LINE NAME
4 NAV LINE ENTRY
5 CLEAR DATA (NO, YES)
1 BACK
2 ARRIVAL WPT ALARM (OFF, ON(0.00-9.99 nm))
3 TURNING LINE (OFF, ON, REVISED)
4 DISP WPT NO. (OFF, ON)
5 DISP WPT NAME (OFF, ON)
1 BACK
3 NAV DATA (OFF, ON)
4 ZOOM (OFF, 2TIMES, 3TIMES)
5 ZOOM DISPLAY
(STAB GND, STAB HDG, STAB NORTH, ARP TRACK)
6 TARGET DATA (1BOX, 2BOX, 3BOX, LARGE)
1 PICTURE
2 IR
3 ES
4 EAV
5 PULSE LENGTH
6 WIPER
7 ECHO AREA
8 NO FUNCTION
9 NO FUNCTION
0 NO FUNCTION
1 OS TRAIL
2 BRILL
3 DISP ARP
4 DISP AIS
5 DISPLAY SELECT
6 ICON DISP
7 PICTURE 1
8 PICTURE 2
9 PICTURE 3
0 PICTURE 4
1 OWN TRACK OFF/ON
2 OWN TRACK COLOR
3 TGT TRACK OFF/ON
4 TGT TRACK COLOR
5 OWN TRACK DISPLAY
6 TARGET TRACK DISPLAY
7 GPS BUOY DISPLAY
8 MAP MARK COLOR
9 DISP WPT NO.
0 DISP WPT NAME
1 BACK
2 ECHO
3 STD KEY
4 ARP/AIS
5 OPERATION
6 PICTURE
7 MARK
8 PLOTTER
9 NAV LINE/WPT
0 NO FUNCTION
See next page.
= default settings
48
1 BACK
2 (PICTURE, IR, ES, EAV, NOISE REJ, ANT SELECT,
PULSE LENGTH, A/C SEA SELECT, AUTO RAIN SELECT,
TUNE SELECT, VIDEO CONTRAST, VIDEO CONTRAST 2,
ANT HEIGHT, SEA CONDITION, 2ND ECHO REJ, PM,
SART, WIPER, ECHO AREA)
1 BACK
2 (ALARM ACK, STBY TX, HL OFF, MODE, OFF CENTER,
CU TM RESET, INDEX LINE, VECTOR TIME, VECTOR
MODE, TARGET LIST, TRAIL TIME, TRAIL GRAD, OS TRAIL,
BRILL, MENU, RANGE UP, RANGE DOWN, ACQ,
TARGET DATA, TARGET CANCEL)
1 BACK
2 (DISP ARP, DISP AIS, TARGET DATA & ACQ, PAST POSN
INTERVAL, REF MARK, CPA LIMIT, CPA, TCPA, TARGET
LIST SORT, TRIAL MANEUVER, ARP/AIS, FUSION, ARP SYMBOL
COLOR, ARP SYMBOL SIZE, ARP PAST COLOR, ARP PAST
POINTS, AIS MESSAGE, AIS SYMBOL COLOR, AIS SYMBOL
SIZE, AIS PAST COLOR, AIS PAST POINTS, TRIAL MODE
CHANGE)
1 BACK
2 (ECHO COLOR, BACK COLOR, RING, WATCH ALARM
RESET, ZOOM, DISPLAY SELECT, RADAR COMBINE, MOB,
USER DEFAULT, TLL, ANCHOR WATCH, COLOR SHIFT, ICON
DISP, OWN TRACK ALL ERASE, TGT TRACK ALL ERASE)
1 BACK
2 (PICTURE1, PICTURE 2, PICTURE 3, PICTURE 4,
NEAR, FAR, NEAR BUOY, FAR BUOY, ROUGH SEA, SHIP,
NEAR BIRD, FAR BIRD)
1 BACK
2 (OWN SHIP MARK, STERN MARK, INDEX LINE, INDEX
LINE MODE, EBL OFFSET BASE, EBL1 BEARING, EBL2
BEARING, CURSOR BEARING, BARGE MARK, CURSOR
1 BACK
2 (CHART COLOR, OWN TRACK OFF/ON, OWN TRACK COLOR,
TGT TRACK OFF/ON, TGT TRACK COLOR, CURSOR L/L
ALIGN, MARK ALL ERASE, WPT ALL ERASE, NAV LINE ALL
ERASE, GRID DISPLAY, OWN TRACK DISPLAY, TARGET TRACK
DISPLAY, MARK DISPLAY, LAND DENSITY DISPLAY, PLACE
NAME DISPLAY, COAST LINE DISPLAY, CONTOUR LINE
DISPLAY, NAV LINE(MAP), DANGER HIGHLIGHT, PROHIBITED
AREA DISP, BUOY DISPLAY, GPS BUOY DISPLAY, TARGET
TRACK MODE, MAP DISPLAY, MAP MARK COLOR
1 BACK
2 NAV LINE DATA, ARRIVAL WPT ALARM, DISP WPT NO., DISP
WPT NAME, SKIP NEXT WPT, TURNING LINE, DEPTH, DEPTH
GRAPH SCALE, CURRENT, WIND, TEMP, DATE-TIME, WPT DATA)
(Continued from previous page)
1 BACK
2 [ECHO]
3 [STD KEY]
4 [ARP/AIS]
5 [OPERATION]
6 [PICTURE]
7 [MARK]
8 [PLOTTER]
9
[NAVLINE/WPT]
0 [NO FUNCTION]
(Continued on next page)
6 [F4] (For recording keystrokes)
49
7 [OPERATION]
8 [TEST]
(Continued from previous page)
1 BACK
2 WHEEL DRIVE (NORMAL, REVERSE)
3 KEY BEEP (OFF, LO, MID, HI)
4 REMOTE KEY (F*-KEY, DISPLAY SELECT)
5 POPUP GUIDANCE (OFF, ON)
6 OWN SHIP VECTOR (OFF, HDG, COURSE)
7 STERN UP (OFF, ON)
8 SHUTTLE FERRY (OFF, MODE1, MODE2)
9 [DUAL RADAR]
0 NEXT
1 BACK
2 [SELF TEST]
3 [ARP TEST]
1 BACK
2 DUAL RADAR
(OFF, MIX, COMBINE)
3 COMBINE MODE
(OWN, EXT)
4 COMBINE SECTOR
(START: 000-359, 60(°)),
ANGLE: 000-359, 240(°))
5 COMBINE RANGE
(START: 00.00-99.99(NM),
LENGTH (00.00-99.99(NM))
6 EXT RADAR (1, 2, 3, 4)
1 BACK
2 USER DEFAULT BACKUP
(F-KEY, HOLD, STORE)
3 VRM TTG (OFF, 1)
50
Pop-up menus (access by
[ARP TARGET MENU]
1 ARP SELECT
AUTO 25/
AUTO 50/
AUTO 75/
AUTO 100
ALL CANCEL
NO/YES
2
3
REF TARGET VECTOR
ARP TARGET menu
[AIS TARGET MENU]
1 SLEEP ALL TRGTS
2
ACTIVATE ALL TRGTS
3 AUTO DISP MESSAGES
4
[RECEIVED MESSAGES]
5 [TRANSMIT MESSAGE]
6 [VOYAGE DATA]
7 [STATIC DATA]
8 [AIS ALM MESSAGES]
AIS TARGET menu
OS POSN menu
[VOYAGE DATA]
1 BACK
2 NAVIGATION STATUS
00
UNDERWAY USING ENGINE
3 ETA
00/000/0000 00:00
4 DESTINATION
5 DRAUGHT
00.0m
6 CREW
0000
[TRANSMIT MESSAGE]
1 BACK
2 ADDRESS TYPE
ADDRESSED/BROADCAST
3 MESSAGE TYPE
SAFETY/BINARY
4 MMSI NO. 000000000
5 CHANNEL
A/B/A or B/A and B
6 OPEN FILE 1
7 SAVE FILE 1
8 EDIT
9 TRANSMIT MESSAGE
[STATIC DATA]
1
BACK
TYPE OF SHIP
000 ALL SHIPS OF THIS TYPE
CALL SIGN
NAME
EXT GPS ANT POSN
A: 000m B: 000m
C: 00m D: 00m
TRANSMIT MESSAGE menu
VOYAGE DATA menu
STATIC DATA menu
[TRAIL MENU]
1 TRAIL MODE
2 TRAIL GRAD
4 TRAIL LEVEL
1
/2/3/4
5 TRAIL RESTART
6 TRAIL COPY
7
[TARGET LIST MENU]
RANGE/SPEED
TGT LIST menu
1 SORT BY
OS TRAIL
TRAIL menu
3 NARROW TRAIL
*
Shown when 8 TRAIL LENGTH
is set to other than "NORMAL".
8 TRAIL LENGTH
NORMAL/12/24H/48H
CURSOR menu
[CURSOR MENU]
[HDG MENU]
1 HDG SOURCE
AD-10
/SERIAL
2 GC-10 SETTING
000.0
°
HDG menu
1
2
3
[SPD MENU]
1 SHIP SPEED
LOG(BT)/LOG(WT)/
GPS
/MANUAL/REF
2 MANUAL SPEED
0.0
kt
3 SET DRIFT
OFF/
ON
SPEED menu
[OS POSN MENU]
1 NAV AID
DEAD RECKONING/
2 MANUAL L/L
00
°
00.000 N
000
°
00.000 W
3 SIO DATA LAN OUTPUT
LAN
NO/YES
NO/YES
9 TRAIL HIDE
*
START: 00:00
END: 00:00
0 [TRAIL COLOR]*
1 BACK
2 COLOR SHIFT
NO/YES
3 TRAIL COLOR
1: FUCHSIA
2: MAROON
3: RED
4: PURPLE
5: YELLOW
6: LIME
7: GREEN
8: OLIVE
9: TEAL
10: CYAN
11: BLUE
12: NAVY
TRAIL COLOR menu
[TRAIL COLOR]
2
TARGET DATA & ACQ/
TARGET CANCEL/
ARP TGT DATA & ACQ/
TARGET TRACK ON/
TARGET TRACK OFF/
REF MARK/
EBL OFFSET/
OFFCENTER/
ZOOM/
MARK DELETE/
OWN TRACK DELETE/
TGT TRACK DELETE/
CHART ALIGN/
TRAIL ERASER
8
9 CURSOR SIZE
SMALL/LARGE
MANUAL 100/
OFF/ON
OFF/ON
OFF/ON
REL/TRUE
OFF/1/2
OFF/ON
OFF/ON
CPA/TCPA/BCR/BCT/
OFF/ON
GPS1/GPS2/
SINGLE/MULTI
51
[MARK MENU(1/2)]
1 ORIGIN MARK STAB
GND/SEA
2 MARK KIND
ORIGIN MARK(No. )/
ORIGIN MARK(SYM)/
MAP MARK/
WP 1~50/
WP 51~ 100/
WP 101~150/
WP 151~ 200/
OWN SHIP SHAPE
BRILL menu, page 1
[BRILL1 MENU (2/2)]
1 BACK
2 BRG CURSOR
3 EBL
4 VRM
5 INDEX LINE
6 ARP SYMBOL
7 AIS SYMBOL
8 L/L GRID
9 MARK
0 CHART
[BRILL1 MENU (1/2)]
1 ECHO COLOR
YEL/GRN/
WHT/COLOR
2 BKGD COLOR
BLK-GRN/
BLK-RED/
BLU-CIR/
BLU/BRT-BLU
3 PANEL DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
0 NEXT
BRILL menu, page 2
MARK menu, page 1/2 MARK menu, page 2/2
[PICTURE MENU]
1 INT REJECT
OFF/1/2/3
2 ECHO STRETCH
OFF/1/2/3
3 ECHO AVERAGE
OFF/1/2/3
4 NOISE REJ
OFF/ON
5 AUTO STC
OFF/ON
6 AUTO RAIN
7
VIDEO CONTRAST
1/2/3/4
A/B/C
8
[PULSE]
9
PICTURE menu
OFF/1/2/3/4
ANTENNA INFORMATION
[ANT INFORMATION]
ANT NO 1
BAND : X-BAND
MODEL : 12
POS : MAIN TOP
ANT NO 2
BAND : X-BAND
MODEL : 12
POS : FORE
ANT NO 3
BAND :
MODEL :
POS :
ANT NO 4
BAND :
MODEL :
POS :
OWN RADAR NO: 1
8 SUB MONITOR
OFF/ON
9 INTER SW PRIORITY
OFF/ON
3 MARK POSN
CURSOR/OS/L/L
00°000.00 N
000°000.00 E
4 MARK COMMENT
OFF/ON
5 MARK L/L EDIT
OFF/ON
0 NEXT
1 BACK
2 MAP DISPLAY
OFF/ON
3 MAP MARK COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
CONDITION menu
[CONDITION MENU]
1 BACK
2 SEA CONDITION
1/2/3/4/5
3 ANT HEIGHT
5/7.5/10/15/20/
25/30/35/40/45
more50m
4 COLOR ERASE
0
[PULSE MENU]
1 BACK
2 0.75NM
S/M1
3 1.5NM
S/M1
4 3NM
M1/M2
5 6NM
M2/L
6 12/24NM
M2/L
PULSE menu
[MARK MENU(2/2)]
0 DEFAULT
9 [CONDITION]
The paper used in this manual
is elemental chlorine free.
・FURUNO Authorized Distributor/Dealer
9-52 Ashihara-cho,
Nishinomiya, 662-8580, JAPAN
Telephone : +81-(0)798-65-2111
Fax :
+81-(0)798-65-4200
A
:
FEB
2007
.
Printed in Japan
All rights reserved.
B
:
OCT
.
14, 2009
Pub. No.
OME-35221-B
*00016425511**00016425511*
(
DAMI
)
FAR2157/2167DS(FISH)
*
00016425511
*
*
00016425511
*
* 0 0 0 1 6 4 2 5 5 1 1 *
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FAR-2107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FAR-2107 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info