543382
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
1.5 Trail Eraser
The trail eraser allows you to erase a portion of a trail you select. This is useful when
the screen becomes cluttered with trails.
1. Place the cursor inside the effective display area.
2. Spin the scrollwheel to show "T-ERASER L=ERASE / EXIT" in the guidance box
at the bottom right-hand corner on the screen.
3. Push the left button successively to select eraser width, from the four choices
shown below. (This also may be done anytime while the guidance box shows the
above-mentioned indication.)
4. Do one of the following to erase a target trail:
To erase a specific point or if you are using a trackball control unit (RCU-015 or
RCU-016), place the cursor on the part of the trail to erase and long-push the left
button. Trails within the track eraser are erased. To continue erasing, repeat the
above procedure.
To erase trails in a wide area, select trail with the cursor, and roll the trackball
while pressing and holding down the [ALARM ACK] key. Trails which contact the
edge of the track eraser are erased.
A beep sounds when the right button, [ALARM ACK] key or trackball is operated.
Note: The trail eraser feature erases only track currently shown on the display. To
erase track stored in the memory, select a long trail time (from the TRAIL MODE
box), to show more trail on the display.
5. To quit the trail eraser feature, push the right button. (This feature is automatically
cancelled when no erasing is done for approx. 30 seconds.)
T-ERASER
L=ERASE
EXIT
Large
Medium
Extra Large
Small
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FAR-2107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FAR-2107 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info