522188
2
Zoom out
Zoom in
Previous page
1/4
Next page
2
SOLAS MODE OPERATIONS
How to set up for a voyage
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 0
***
STATUS DETAIL
***
UNDER WAY USING
ENGINE
2. If your navigation status is different
from that shown, do a) and b) below. If
it is the same as shown, go to step 3.
a) Press the ENT key.
b) Press or to choose
appropriate status and then
press the ENT key.
3. Press to show page 2 of the NAV
STATUS menu.
[DESTINATION]
WX
*************
(0/0)
[NEW?]
4. NEW is selected; press the ENT key.
[DESTINATION]
WX
ENTER A NEW
DESTINATION
QUIT:[NAV STATUS]
5. Press the ENT key. Use the
CursorPad to enter destination and
then press the ENT key.
6. Press to show page 3 of the NAV
STATUS menu.
[ARRIVAL TIME]
WX
DATE
[UTC]: - -/- - -
TIME[UTC]: - -*- -
7. DATE is selected; press the ENT key.
8. Use the CursorPad to enter the date
of arrival and then press the ENT key.
9. TIME is selected; press the ENT key.
10. Use the CursorPad to enter the
estimated time of arrival and then
press the ENT key. Use 24-hour
notation.
11. Press to show page 4 of the NAV
STATUS menu.
[CARGO TYPE & CREW]
WX
CREW: 0
TYPE NO: 00
**** TYPE DETAIL****
NOT AVAILABLE
12. CREW is selected; press the ENT key.
13. Use the CursorPad to enter number of
crew and then press the ENT key.
14. TYPE NO. is selected; press the ENT
key.
15. Use the CursorPad to choose type of
vessel and then press the ENT key.
16. Press to show page 5 of the NAV
STATUS menu.
[DRAUGHT]
W
DRAUGHT: 0.0 m
17. Press the ENT key.
18. Use the CursorPad to enter ship’s
draught, and then press the ENT key.
19. Press the DISP key to close the menu.
How to send a message
1. Press the MENU key.
2. Use or to choose MSG and then
press the ENT key.
[MSG]
CREATE MSG
TX LOG
RX LOG
3. CREATE MSG is selected; press the
ENT key.
[CREATE MSG]
SET MSG TYPE
SET MSG
SEND MSG
4. SET MSG TYPE is selected; press the
ENT key.
[SET MSG TYPE]
ADRS TYPE: BROAD CAST
MMSI : - - - - - - - - -
MSG TYPE : NORMAL
CHANNEL: ALTERNATE
MMS
5. ADRS TYPE is selected; press the
ENT key.
BROAD CAST
ADRS CAST
6. Choose ADRS CAST or BROAD CAST
as appropriate. Press the ENT key.
7. For BROAD CAST, go to step 8. For
ADRS CAST, “MMSI” is selected; press
the ENT key, use the CursorPad to
enter MMSI number of receiving vessel
and then press the ENT key.
8. MSG TYPE is chosen; press the ENT
key.
SAFETY
NORMAL
9. Choose message type: NORMAL
(message other than safety) or
SAFETY (important navigational or
meteorological warning). Press the
ENT key.
10. CHANNEL is chosen; press the ENT
key.
ALTERNATE
BOTH A & B
A
B
11. Choose which channel to transmit your
message over.
12. Press the ENT key.
13. Press the MENU key to return to the
CREATE MSG sub-menu.
14. Choose SET MSG and press the ENT
key.
15. Use the CursorPad to enter your
message. Use or to choose
character; or to shift the cursor.
16. Press the ENT key to return to the
CREATE MSG sub-menu.
17. Choose SEND MSG; press the ENT
key to send your message.
18. Press to choose YES; press the
ENT key.
How to set CPA/TCPA
1. Press the MENU key.
2. Use or to choose USER
SETTINGS and then press the ENT
key.
3. Use or to choose CPA/TCPA
ALARM and then press the ENT key.
[CPA/TCPA ALARM]
CPA : 6.00 nm
TCPA : 60 min
ALARM MODE : ON
ALARM BUZZER: ON
QUIT[MENU]
4. CPA is selected; press the ENT key.
5. Use the CursorPad to enter CPA and
then press the ENT key.
6. TCPA is selected; press the ENT key.
7. Use the CursorPad to enter TCPA and
then press the ENT key.
8. ALARM MODE is selected; press the
ENT key.
9. Choose ON to enable the CPA/TCPA
alarm feature; OFF to disable it. Press
the ENT key.
10. ALARM BUZZER is selected; press
the ENT key.
11. Choose ON to enable the CPA/TCPA
audio alarm, or OFF to disable it. Press
the ENT key.
12. Press the DISP key to close the menu
INLAND AIS OPERATIONS
How to select INLAND AIS mode
1. Press the NAV STATUS key.
[NAV STATUS]
NAV STATUS: 15
AIS MODE: SOLAS
***
STATUS DETAIL
***
NOT DEFINED
(DEFAULT)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FA150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FA150 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FA150

Furuno FA150 Installation Guide - English - 55 pages

Furuno FA150 User Manual - English - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info