522188
90
Zoom out
Zoom in
Previous page
1/118
Next page
APPENDIX
AP-3
Menu Tree - Inland AIS
ADRS TYPE
(BROAD CAST, ADRS CAST)
MMSI
MSG TYPE
(NORMAL, SAFETY)
CHANNEL
(ALTERNATE, BOTH A & B, A, B)
RETRY TIMES (0-3)
CREATE MSG
TX LOG
RX LOG
SET MSG TYPE
SET MSG
SEND MSG
TEXT
ETA/RTA
NO. OF PERSONS
EMMA WARNING
WATER LEVEL
[MENU] key
MSG
SENSOR STATUS (Display sensor status.)
INTERNAL GPS (Displays data about internal GPS receiver.)
(Continued on next pa
g
e)
USER
SETTINGS
INITIAL
SETTINGS
SET INT ANT POSN
A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
SET MMSI (MMSI, IMO NO., NAME, CALL SIGN, ENI)
SET EXT ANT POSN
MODE (STANDARD, MONITOR, SERVICE, BEACON, DISABLE)
SPEED (4800BPS, 9600BPS, 19.2KBPS, 38.4KBPS, 57.6KBPS)
SET COM1 MODE (LONG RANGE, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM2 MODE (EXT DISPLAY, MONITOR, HI LEVEL IF, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM3 (Same as SET COM2.)
SET COM4 MODE (SENSOR, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM5 MODE (SENSOR(Fixed)
SPEED (IEC61162-1, IEC61162-2)
SET COM6 MODE (SENSOR(Fixed)
SPEED (IIEC61162-1, IEC61162-2, AD-10)
CREATE MSG
ETA LOG
RTA LOG
SET MSG TYPE
SET DESTINATION
SET ETA
SEND MSG
COUNTRY CODE, LOCATION CODE,
FAIRWAY NO., TERMINAL CODE,
FAIRWAY HECT
ETA (DATE, TIME), AIR DRAUGHT,
NO. OF TUGBOATS
CREATE MSG
TX LOG
ADRS TYPE
(BROAD CAST, ADRS CAST)
MMSI
TYPE
(SOLAS(IFM16), INLAND(RFM55))
CHANNEL
(ALTERNATE, BOTH A & B, A, B)
RETRY TIMES (0-3)
SET MSG TYPE
VIEW MSG
SEND MSG
CPA (0.0-6.00 (NM))
TCPA (0-60 (min))
ALARM MODE (ON, OFF)
ALARM BUZZER (ON, OFF)
KEY BEEP (ON, OFF)
ALARM BUZZER (ON, OFF)
AUTO SORT (ON,OFF)
DISP SART TEST (ON, OFF
LONG RANGE
RECEIVED MSG
CPA/TCPA ALARM
LANGUAGE (ENGLISH, FRENCH, DUTCH, GERMAN)
TIME DIFF (-14:00 to +14:00)
RANGE CPA UNITS (NM, km)
SOG UNITS (kn, km/h)
LENGTH UNITS (m, dm)
POPUP (ALL, ABM, OFF)
BUZZER (ON, OFF)
A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
Note: The INITIAL SETTINGS sub-menu shown
here is the one accessed with a password,
which permits changing of settings. If
accessed without a password, in which
case "SET" in a menu title is replaced with
"VIEW" and settings cannot be changed.
SET SHIP TYPE (Type no.)
SET I/O
PORT
SET
COM
PORT
SET PC
PORT
LR MODE (AUTO, MANUAL)
MSG27 TX (ON, OFF)
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FA150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FA150 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FA150

Furuno FA150 Installation Guide - English - 55 pages

Furuno FA150 User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info