522188
14
Zoom out
Zoom in
Previous page
1/118
Next page
1. OPERATION
1-3
The FA-150 should be powered while underway or at anchor. The master may
switch off the AIS if he believes that the continual operation of the AIS might
compromise the safety or security of his ship. The AIS should be restarted
once the source of danger has gone.
The equipment transmits own ship static data within two minutes of start-up
and it is transmitted at six-minute intervals thereafter. Static data includes
MMSI number, IMO number, call sign, ship name, ship length and width, ship
type and GPS antenna position.
In addition to static data, ship’s dynamic data is also transmitted. This data
includes position with quality indication, SOG, COG, rate of turn, heading, etc.
Dynamic data is transmitted every 2 s to 3 min depending on ship’s speed and
course change. Voyage-related data, such as ship’s draft, hazardous cargo,
destination and estimated time of arrival, are transmitted at six-minute
intervals.
The FA-150 starts receiving data from AIS-equipped ships as soon as it is
turned on, and those ships’ location are shown on the plotter display with the
AIS symbol. (To learn more about the plotter display, see section 1.7.) With
connection of a radar or ECDIS, the AIS target symbols may be overlaid on the
radar or ECDIS.
Note 1: If no navigation sensor is installed or a sensor such as a gyrocompass
has failed, the AIS automatically transmits “not available” data to AIS-equipped
ships.
Note 2:
The reporting intervals are as follows:
Ship’s dynamic conditions and nominal reporting interval
Ship’s navigation status Nominal reporting interval
Ship at anchor and not moving faster than 3 kn 3 minutes
Ship at anchor and moving faster than 3 kn 10 seconds
Ship speed 0-14 kn 10 seconds
Ship speed 0-14 kn and changing course
3 1/3 seconds
Ship speed 14-23 kn
6 seconds
Ship speed 14-23 kn and changing course
2 seconds
Ship speed faster than 23 kn
2 seconds
Ship speed faster than 23 kn and changing course
2 seconds
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FA150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FA150 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno FA150

Furuno FA150 Installation Guide - English - 55 pages

Furuno FA150 User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info