522183
27
Zoom out
Zoom in
Previous page
1/40
Next page
19
3. INITIAL SETTINGS
3.1 DIP Switch Setting
The DIP switch S2 sets up the system according to the equipment connected. In the default setting
all switches (1-8) are OFF. The DIP switch S3 should not be adjusted; leave all switches in the
OFF position.
DIP switch S2 description
Switch
No.
Function Setting
1 IP mode OFF: FIxed (static) IP address. Set the IP address
with switch #2, referring to the table below.
ON: Use IP address assigned by DHCP.
2 IP address no. OFF: Set the #1 switch to OFF to set IP address. See
the table on the next page for IP address assignment.
3 Restore default settings (other than
LAN and transducer)
See section 4.3.
4 Restore ALL default settings See section 4.3.
5 - 6 Keep these switches in the OFF position.
7 No use
8 No use
WARNING
Do not open the equipment unless totally
familiar with electrical circuits.
Only qualified personnel should work inside
the equipment.
DIP Switches
(factory settings)
1-8
ON
OFF
S3
S2
4-1
OFF
ON
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno DFF1-UHD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno DFF1-UHD in the language / languages: English as an attachment in your email.

The manual is 12,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info