522185
9
Zoom out
Zoom in
Previous page
1/15
Next page
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 9 of 15
Cable Tray
Grommets
Cable Tray
Cover
Cable Tray
Screws
Note: For the power synchronization feature to function, 4 pair Ethernet cables must be used.
See page 6 for a list of cable options.
Connecting Cables to the BBWX2
Each cable type has a corresponding color-coded rubber cable grommet (for water
resistance). The cable grommets are inserted into the enclosure cable tray of the Receiver
unit (as shown below).
The following colors correspond to each type of cable:
The yellow grommet is for the antenna cable
The blue grommet is for the power cable
The red grommets are for the Ethernet cables
The green grommets are for the audio cables
The black grommets (solid) are for when there is no cable
To connect the cables to the BBWX2:
1. Undo the tray cover on the BBWX2 enclosure (three screws on the back).
2. Plug the cable into the appropriate connector.
3. Install the corresponding cable grommet in the enclosure cable tray
4. Press the cable into the slot in the grommet. Make sure it is seated well with minimal
strain.
5. Repeat for all cables to be installed.
6. Insert black grommets (with no cable hole) into slots
with no cables.
7. Place the tray cover back on the unit and tighten
screws.
Note: If the unit was already mounted, loosen mounting screws, lift and remove unit to
access tray cover for a cable change.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno BBWX2 - NavNet VX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno BBWX2 - NavNet VX2 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno BBWX2 - NavNet VX2

Furuno BBWX2 - NavNet VX2 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info