28290
173
Zoom out
Zoom in
Previous page
1/239
Next page
7. CUSTOMIZING YOUR UNIT
7-12
4. Select function desired with the Trackball, then press the ENTER soft key or ENTER
knob to register your selection.
5. Press the MENU key to close the menu.
Plotter function keys
Menu Item Function
Function Key
Label
OFF Assigns no function.
ADD: ADD NEW WPT Registers waypoint at cursor position. Place cursor
for waypoint location, then press function key.
ADD
MWP: MOVE WPT Moves selected waypoint to different position.
Select waypoint, press function key, select new
position, then press the ENTER knob.
MWP
RUL: RULER Measures range and bearing between two points.
Press START POINT soft key to change starting
point if necessary. Range and bearing between two
points appears at the top of the screen.
RUL
GWP: GOTO WPT Specify waypoint to set as destination. Enter
waypoint name in window, then press the ENTER
soft key.
GWP
GRT: GOTO ROUTE Specify route to follow. Enter route name in window,
then press the ENTER soft key.
GRT
EML: EDIT MK/LINE Displays mark & line menu. Press appropriate soft
key to access menu item.
EML
TRK: TRACK ON/OFF Each press starts or stops recording/plotting own
ship’s track.
TRK
TTM: TTM ON/OFF Turns TTM (target track) display on/off. TTM
DTT: DEL TGT TRACK Erases all TTM track. DTT
ALP: ALPHA LIST Displays waypoint alphanumeric list. ALP
LCL: LOCAL LIST Displays waypoint local list. LCL
RTE: ROUTE LIST Displays route list. RTE
DBX: D. BOX ON/OFF Shows/hides data boxes. DBX
CHG: CHANGE CNTRL Changes control in combination screen. CHG
QP: QUICK POINT Sets quick point (for navigation). QP
MRK: MARK ENTRY Enters the mark at the cursor position. MRK
Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1945C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1945C in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info