28290
43
Zoom out
Zoom in
Previous page
1/239
Next page
2. RADAR OPERATION
2-14
Cursor
Place cursor
where desired.
Press the MANUAL soft key.
SHIFT
Manual shift
AUTO SHIP SPEED
15
2.16 Shifting the Picture
Own ship position, or sweep origin, can be displaced manually or automatically to expand
the view field without switching to a larger scale. Zoom is not available when the display is
shifted.
2.16.1 Manual shift
The sweep origin can be shifted in
any presentation mode to a point
specified by the cursor by up to 50%
of the range in use in any direction.
1. Locate the cursor anywhere within
the effective radius of the display.
2. If not displayed, press the
HIDE/SHOW key to show the
radar soft keys.
3. Press the RADAR DISPLY soft key.
4. Press the SHIFT soft key.
5. Press the MANUAL soft key to shift. The heading line shifts to the cursor location.
SHIFT appears at right-hand corner of the display.
To cancel shift, press the RADAR DISPLY, SHIFT and OFF soft keys.
2.16.2 Automatic shift
The amount of automatic shift is calculated
according to ship’s speed, and the amount
of shift is limited to 50% of the range in use.
For example, if you set the shift speed
setting for 15 knots and the ship is running at 10 knots the amount of shift will be about 34%.
The formula for determining shift amount is as shown below. Automatic shift mode is only
available in the head-up mode.
Setting automatic shift maximum speed
1. If not displayed, press the HIDE/SHOW key to show the radar soft keys.
2. Press the RADAR DISPLY soft key.
3. Press the SHIFT soft key to show the shift soft keys.
4. Press the AUTO S.SPD soft key to display the auto ship
speed setting window.
5. Adjust the Trackball or ENTER knob to set the
maximum speed of your vessel, and then push the
ENTER knob or the ENTER soft key to set. The setting
range is 1-999 kt and the default setting is 15 kt.
Automatic shift
Press the AUTO soft key. To cancel shift, press the RADAR DISPLY, SHIFT and OFF soft
keys.
Ship's speed
Shift speed setting
X 0.5 = Amount of shift(
%
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1945C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1945C in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info