28286
13
Zoom out
Zoom in
Previous page
1/46
Next page
2-2
2.2 Turning the Radar On/Off
Press the [POWER] key to turn the radar on
or off.
The control panel lights and a timer displays
the time remaining for warm up of the mag-
netron (the device which produces radar
pulses), counting down from 1:30 to 0:01.
2.3 Transmitting
After the power is turned on and the magne-
tron has warmed up, STBY (Stand-By) ap-
pears at the screen center. This means the
radar is now fully operational.
Press the [STBY TX] key to transmit.
When transmitting, any echoes from targets
appear on the display. This radar displays
echoes in eight tones of green according to
echo strength.
2.4 Stand-by
When you won’t be using the radar for an
extended period, but you want to keep it in a
state of readiness, place it in stand-by by
pressing the [STBY TX] key. The display
shows “STBY,” navigation data, or goes into
the economy mode depending on menu set-
ting. (More on menu operation later.)
Economy mode
The CRT can be set to automatically turn it-
self off when in stand-by, to reduce power
consumption. This feature is called the
“economy mode.” Power consumption in the
economy mode is 28 W. When the economy
mode is on, the lamp next to the [POWER]
key lights.
Navigation data display during
stand-by
If a navigation aid inputs navigation data to
this radar in IEC 61162 format, navigation
data can be displayed during stand-by. You
can turn the navigation data display on/off
through the menu. Figure 2-2 shows a typi-
cal navigation data display during stand-by.
Figure 2-2 Typical navigation data display
during stand-by
Bearing to TO
Waypoint
N
SPEED
TRIP
DEPTH TEMPERATURE
10.5
kt
125
m
ST-BY
000.3 nm
+17.3
°C
HDG
092.5°
CRS 180.0°M
WPT TTG 01:08
BRG
RNG
45.0° M
12.0NM
OWN SHIP
LAT 30°00.00N
LON 135°00.00E
TD 36378.1
59096.4
XTE
R 0.3NM
E
S
W
L
R
XTE
XTE
Time-to-go to Stand-by
Trip distance since power on
Speed
Depth
TO Waypoint
bearing
Course
Heading
Time-to-go to
TO Waypoint
Range to TO Waypoint
Ship's position in latitude
and longitude and Loran
TDs
Cross Track Error
Mark " " shows
direction and amount of
error.
Temperature
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1942MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1942MK2 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info