522132
107
Zoom out
Zoom in
Previous page
1/126
Next page
6. MAINTENANCE, TROUBLESHOOTING
6-4
6.5 Simple Troubleshooting
This section provides simple troubleshooting procedures which the user can follow to
restore normal operation. If you cannot restore normal operation, do not check inside
the unit. Have a qualified technician check the equipment.
Simple troubleshooting
Problem Remedy
You cannot turn on the power. Check for blown fuse.
Check that the power connector is fastened.
Check for corrosion on the power cable con-
nector.
Check for damaged power cable.
Check battery for correct voltage output.
There is no response when a key is
pressed.
Turn off and on the power. If you do not get a
response, the key is damaged. Contact your
dealer for instructions.
The power is on and you operated the
STBY/TX key to transmit. The marks
and letters appear, but no echo ap-
pears.
Check that the antenna cable is fastened.
Tuning is correctly adjusted, but 
sensitivity is poor.
Replace the magnetron. Contact your dealer.
The range is changed, but radar pic-
ture does not change.
Try to hit the RANGE key again.
Turn off and on the display unit.
Poor discrimination in range because
of many echoes from the waves.
Adjust A/C SEA control.
The true motion presentation is not
working correctly.
Check that the setting of [Display Mode] in
the [Display] menu is set to [True Motion].
Check if the heading and position data are in-
put and correct.
The range rings are not displayed. Check that the setting of [Rings Brill] in the
[Brill/Color] menu is set to other than [Off].
Target is not tracked correctly be-
cause of sea clutter.
Adjust A/C SEA and A/C RAIN controls.
www.busse-yachtshop.de | info@busse-yachtshop.de
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1835 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1835

Furuno 1835 Installation Guide - English - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info