28260
54
Zoom out
Zoom in
Previous page
1/63
Next page
AP-8
4. On the "TCPA Set" line, select a TCPA limit
desired. (30s, 1, 2, 3, 4, 5, 6, 12M)
5. Press the [ACQ/ENTER] key.
6. Press the [MENU] key to close the menu.
The flashing of the triangle plot symbol and
vector remain on the screen until the danger-
ous situation is no longer present or you in-
tentionally terminate tracking of the target by
using the [SELECT/CANCEL] key.
Lost Target Alarm
When the system detects a loss of a tracked
target, the target symbol becomes a flashing
diamond.
Installation of ARP-10
Necessary Parts
ARP-10 (000-086-852)
emaNepyT.oNedoCytQ
draoB01-PRA
7009P81039-674-800
1
recapS
02-QS056-108-000
3
rehsaWgnirpS
W1915C3M402-468-000
3
wercSdaeHnaP
W0072C8x3M404-188-000
3
wercSdaeHnaP
*)rehsaw/w(
01MRWS8x3477-508-0003
* Not used.
Mounting (For technician only)
1. Remove the cover from the display unit as
follows.
1 Unscrew four binding screws (M4 x
10).
2 Unfasten six binding screws (M3 x
10).
3 Remove three rubber covers to loosen
three hex nuts.
4 Loosen two hex nuts.
1
1
1
1
2
2
3
4
2. Attach the ARP-10 Board to the right-hand
chassis of the display unit, using the spacer
supplied as follows.
1) Fasten three spacers tightly.
2) Attach the P107 connector on ARP-
10 Board to J107 connector on
SPU Board.
3) Tighten three pan head screws to fix the
ARP-10 Board.
$
$
Spacer
SQ-20 3pcs.
Spring Washer
M3 3pcs.
Pan Head
Screw
M3 x 8 3pcs.
J107
P107
SPU Board
SPU9211
ARP-10 Board
18P9007
Front
$: Pull the front panel slightly to fix these screws.
Input Signal Check
Place the radar in transmit condition after con-
necting the speed and heading sensor. Make
sure the following items are OK on Self Test
menu.
SPEED
COURSE
TRIGGER
Video Signal Check
Make sure the follows on Self Test menu.
VIDEO : OK
Adjust GAIN, A/C SEA and A/C RAIN so
that the readout for FE-DATA 1 and 2 are
less than 1,000.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1832 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1832 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1832

Furuno 1832 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info