28260
24
Zoom out
Zoom in
Previous page
1/63
Next page
13
True motion
True motion displays own ship and moving
objects in their true motion.
3.3 Magnifying Long Range
Echoes (echo stretch)
Normally, the reflected echoes from long
range targets appear on the display as weaker
and smaller blips even though they are com-
pensated by the radars internal circuitry. The
echo stretch function magnifies these small
blips in all ranges. Two types of echo stretch
are available: ES1 which stretches echoes in
bearing direction and ES2 which stretches
them in both range and bearing directions.
To turn the echo stretch on or off;
1. Press the [MENU] key to open the menu.
2. Select “ES”.
3. Each press the [ACQ/ENTER] key changes
the echo stretch function in the sequence
of ES1, ES2 and OFF. ES1 or ES2 appears
at the top right-hand corner of the display
when echo stretch is on.
Bearing
direction
Bearing
direction
Range
direction
Echo stretch 1
Echo stretch 2
Figure 3-3 Echo stretch
Note: This function magnifies not only tar-
gets but also sea clutter and radar interference.
For this reason be sure the controls for ad-
justment of sea clutter and radar interference
are properly adjusted before activating the
echo stretch.
Note: ES2 is not available on Short Range.
3.4 Echo Trail
You can show the movement of all radar tar-
gets relative to your vessel in afterglow. This
function is useful for alerting you to possible
collision situations.
Starting echo trail
1. Press the [MENU] key to open the menu.
2. Select “ECHO TRAIL” by the omnipad.
3. Select “ACTIVATE” by pressing the
[ACQ/ENTER] key.
Figure 3-4 How the echo trail feature works
TRAIL, the echo trail time selected (on
“OTHER MENU”) and elapsed time appear
at the top right-hand corner of the display.
Then, afterglow starts extending from all tar-
gets.
Note: Trails are restarted when range or mode
is changed or zoom or shift is turned on.
Fixed time trail
1. When the elapsed time clock counts up to
the trail time selected, the elapsed time dis-
play freezes.
2. The oldest portions of trails are erased so
only the latest trail, equal in length to the
trail time selected, is shown.
3. Trail continues.
For example, the one minute trail time is se-
lected. When the elapsed time clock counts
up to 60 seconds, the elapsed time display
freezes at “60,” but the latest one minute of
trail are erased and then trail continuous.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1832 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1832 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1832

Furuno 1832 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info