522147
218
Zoom out
Zoom in
Previous page
1/252
Next page
7. MAINTENANCE, TROUBLESHOOTING
7-8
Processor unit test
Press the A:PROCESSOR UNIT TEST soft key at the MEMORY I/O TEST
menu to test the processor unit. The equipment displays program version
number and checks devices. Results for device checks are shown as OK or NG
(No Good). For any NG, request service. A test connector is required to check
ports. “ - - ” shown when no test connector is connected. Chart number shown
when chart is inserted. Press the E:RETURN soft key to return the MEMORY I/O
TEST menu.
XX.XX* = Program Version No.
XX.XX* = Program Version No.
Model 1800-BB/1900-BB series GD-1900C-BB
* = For FURUNO, NAVIONICS model. 1950010 XXX for C-MAP model.
Program No. 1950011 XX.XX*
ROM1, 2 : OK
ROM3 : OK
ROM4 : OK
SDRAM : OK
SRAM : OK
INT. BATTERY : OK
PORT
NMEA IN/OUT 1 : - -
NMEA IN/OUT 2 : - -
RCU : OK
HEADING : 352.2
°
NETWORK : - -
CARD SLOT :
CHART NUMBER:
HEADING PULSE : OK
BEARING PULSE : OK (XX.Xrpm)
TOTAL ON TIME : 000000.0 h
TOTAL TX TIME : 000000.0 h
Machine Status +130
Program No. 1950011 XX.XX*
ROM1, 2 : OK
ROM3 : OK
ROM4 : OKS
SDRAM : OK
SRAM : OK
INTERNAL
BATTERY : OK
PORT
NMEA IN/OUT 1 : - -
NMEA IN/OUT 2 : - -
RCU : OK
HEADING : 352.2
°
NETWORK : - -
CHART NUMBER:
Machine Status +130
No results appear when
"sub" radar selected as
radar source.
Processor unit test results
GPS sensor test (Requires GPS Receiver GP-310B/320B)
Press the B:GPS SENSOR TEST soft key at the MEMORY I/O TEST menu to
test the GPS Receiver GP-310B/320B. The equipment displays GPS receiver
program version number, and checks the GPS unit for proper operation,
displaying OK or NG (No Good) as the result. For NG, request service. Press the
E:RETURN soft key to return the MEMORY I/O TEST menu.
*: This is for GPS-310B,
"48502380XX" appears for GPS-320B.
XX = Program Version No.
PROGRAM No. *48502180XX
GPS UNIT : OK
Machine Status +115
GPS receiver test results
offered by Busse-Yachtshop.de
218


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1823C-BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1823C-BB in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info