522147

Furuno 1823C-BB Manual

114
Zoom out
Zoom in
Previous page
1/252
Next page
3. PLOTTER OPERATION
3-32
Editing a waypoint from the plotter display
You may edit waypoints from the plotter display as follows:
1. Press the [MENU] key followed by the C:WAYPOINTS/ROUTES and
A:WAYPOINTS soft key to open the waypoint menu.
2. Press the C:WAYPOINT BY CURSOR soft key.
3. Operate the trackball to place the cursor on the waypoint which you want to
change. A flashing diamond mark appears on the waypoint when it is
correctly selected.
4. Press the D:EDIT/MOVE soft key. Three soft keys replace the D:EDIT/MOVE
soft key:
B:EDIT WPT: Edit from the waypoint entry window.
C:MOVE WPT: Move waypoint to new position with the cursor.
D:ERASE WPT: Erase waypoint. See paragraph 3.8.3.
5. Press the appropriate soft key. For the “EDIT WPT,” the waypoint entry
window appears; edit data as appropriate. For “MOVE WPT,” do the
following:
a) Operate the trackball to place the cursor on the location desired for the
waypoint. A line connects previous position and new position.
b) Push the [ENTER] knob. The waypoint moves to the cursor position and its
position is changed on the waypoint list. If the waypoint is set as
destination or is part of a route, you are asked if you are sure to move the
waypoint. In this case, push the [ENTER] knob to move the waypoint, or
press the [CLEAR] key to cancel.
c) Press the [MENU] key to finish.
BRIDGE
WP-002
34° 22. 345’N 86.6°M TRIP NU
080° 22. 345’E
4.53nm 99.9 nm
Press to alternately display
range/bearing from own ship
to cursor, range/bearing from
original waypoint position to
cursor position.
Below is an example of the
range/bearing from original
waypoint position to cursor
position.
FISH
(2) Drag cursor to new position,
then push the [ENTER] knob.
(1) Select waypoint to move,
then press D:EDIT/MOVE
and C:MOVE WPT soft keys.
16.0nm
+
Range and bearing from
own ship to cursor
34° 22. 3456’N FROM 5.3°M
080° 22. 3456’E
FISH 1.45 nm
+
CANCELE
RNG
BRG
C
Plotter display
offered by Busse-Yachtshop.de
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1823C-BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1823C-BB in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info