522147

Furuno 1823C-BB Manual

109
Zoom out
Zoom in
Previous page
1/252
Next page
3. PLOTTER OPERATION
3-27
3. Use the trackball to select line style desired, then press the C:ENTER soft key.
The line style “dot” disables line drawing. Edge of lines is determined by
mark shape. For example, selecting the circle shape will join lines with a
circle as below.
4. Press the [MENU] key twice to close the menu.
3.7.4 Erasing marks, lines
Erasing an individual mark
1. Operate the trackball to place the cursor on the mark you want to erase.
2. Press the [CLEAR] key to erase the mark.
Erasing an individual line
Place the cursor on an end of the line to erase, then press the [CLEAR] key.
Placing the cursor at the intersecting point of two line segments will erase both
line segments.
Erasing marks, lines by area
This feature is not available when the overlay mode is in use.
1. Press the [MENU] key followed by the A:CHART SETUP, B:TRACKS &
MARKS CONTROL and C:ERASE T & M soft keys to show the ERASE menu.
2. Use the trackball to select ERASE MARKS BY AREA, then press the A:EDIT
soft key. The menu is erased and the plotter display appears.
3. Use the trackball to place the cursor at the top left-hand corner of the area
which you want to erase marks and lines from.
4. Press the C:START soft key or the [ENTER] knob.
5. Move the cursor to the bottom right-hand corner of the area which you want
to erase marks and lines from.
6. Press the C:END soft key or the [ENTER] knob. You are asked if you are
sure to delete the marks/lines selected. Press the [ENTER] knob to erase.
7. Press the [MENU] key twice to close the menu.
Erasing all marks, lines
You can erase all marks and lines collectively. Be absolutely sure you want to
erase all marks and lines - erased marks and lines cannot be restored.
1. Press the [MENU] key followed by the A:CHART SETUP, B:TRACKS &
MARKS CONTROL and C:ERASE T & M soft keys to show the ERASE menu.
2. Use the trackball to select ERASE ALL MARKS/LINES, then press the
A:EDIT soft key.
3. Push the [ENTER] knob to erase all marks and lines.
4. Press the [MENU] key twice to close the menu.
offered by Busse-Yachtshop.de
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1823C-BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1823C-BB in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info