596237
15
Zoom out
Zoom in
Previous page
1/33
Next page
2-4
2.9 Adjusting the A/C RAIN
Control
(reducing rain clutter)
The vertical beamwidth of the antenna is de-
signed to see surface targets even when the
ship is rolling. However, by this design the
unit will also detect rain clutter (rain, snow,
hail, etc.) in the same manner as normal tar-
gets. Figure 2-3 shows the appearance of rain
clutter on the display.
Adjusting A/C RAIN
When rain clutter masks echoes, adjust the
[A/C RAIN] control. This control splits up
these unwanted echoes into a speckled pat-
tern, marking recognition of solid targets
easier.
Appearance of
rain clutter
A/C RAIN control adjusted;
rain clutter suppressed.
Figure 2-3 Effect of A/C RAIN
Note: In addition to reducing clutter, the [A/C
RAIN] control can be used in fine weather to
clarify the picture when navigating in confined
waters. However, with the circuit activated the
receiver is less sensitive. Therefore, turn off
the circuit when its function is not required.
2.10 Adjusting FTC
To suppress rain clutter from heavy storms
or scattered rain clutter, press the [A/C RAIN]
control ([FTC] switch). The FTC circuit splits
up these unwanted echoes into a speckled
pattern, marking recognition of solid targets
easier. “FTC” appears at the top right-hand
corner of the display when the circuit is turned
on.
Note: In addition to reducing clutter, the FTC
can be used in fine weather to clarify the pic-
ture when navigating in confined waters.
However, with the circuit activated the re-
ceiver is less sensitive. Therefore, turn off the
circuit when its function is not required.
2.11 Tuning the Radar Receiver
The radar receiver is tuned automatically
each time you turn on the power, thus there
is no front panel control for adjustment of the
receiver. To show the automatic tuning cir-
cuit is working, a tuning bar displays tuning
condition.
2.12 Erasing the Heading
Marker
The heading marker may occasionally mask
a target. To view the target, you can tempo-
rarily erase the heading marker by pressing
and holding down the [GAIN (HM OFF)] con-
trol. Release the control to re-display the
markers.
Heading
marker
Figure 2-4 Heading marker
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1761MK3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1761MK3 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info