28224
223
Zoom out
Zoom in
Previous page
1/260
Next page
7. MAINTENANCE, TROUBLESHOOTING
7-5
7.4.3 Plotter
Requires GPS Receiver GP-310B/320B.
Plotter troubleshooting
If… Then
position is not fixed within
three minutes
! check that antenna connector is firmly fastened.
! Check the satellites numbers received, on the GPS status display (GPS
SENSOR SETTINGS menu, GPS STATUS key see page 7-11).
position is wrong ! check that the correct geodetic chart system is selected, on the GPS SENSOR
SETTINGS menu.
! enter position offset on the GPS SENSOR SETTINGS menu.
track is not plotted ! plotting has been stopped. (H” icon appears at the top of the display.) Press the
TRACK HALT soft key on the TRACKS & MARKS CONTROL menu to start
plotting again.
bearing is wrong ! check that correct magnetic variation is entered, on the GENERAL SETUP
menu.
Loran C (or Decca) TDs do
not appear
! check that LORAN C (or DECCA) is selected at TD DISPLAY on the GENERAL
SETUP menu. Also, check that proper Loran C (Decca) chains codes are
entered, on the TD SETUP menu.
Loran C TDs are wrong ! enter TD offset on the TD SETUP menu.
ship’s speed indication is
not zero after the ship is
stopped
! try to decrease speed/course smoothing on the GPS SENSOR SETTINGS
menu.
223


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1722 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info