28224
174
Zoom out
Zoom in
Previous page
1/260
Next page
5. CUSTOMIZING YOUR UNIT
5-2
Contents of general menu
Item Description Settings Default Setting
Key Beep Turns key operation beep on/off. On, Off On
Language Chooses menu language. English, French, German,
Italian, Portuguese, Spanish
English
Range Unit Chooses unit of range and speed measurement. nm, kt; km, km/h; sm, mph; nm
& yd, kt; nm & m, kt; km & m,
km/h; sm & yd, mph
nm, kt
Temperature Unit Chooses unit of water temperature measurement. °C, °F °F
Depth Unit Chooses unit of depth measurement. ft, m, fa, PB (Passi/Braza) ft
Temperature
Source
Chooses source of water temperature data. ETR (network sounder), NMEA NMEA
Depth Source Chooses source of depth data. ETR, NMEA. NMEA
Reset Trip Log Resets distance run. Yes, No No
Speed Source Chooses source of own ship’s speed data. ETR, NMEA NMEA
Lat/Lon Display Chooses how many digits (or seconds) to display
after decimal point in latitude and longitude
position.
DD°MM.MM’, DD°MM.MMM’,
DD°MM.MMMM’,
DD°MM’SS.S”
DD°MM.MMMM’
TD Display Chooses TD type. Loran C, Decca Loran C
Speed Chooses speed format to display. SOG (Speed over ground),
STW (Speed through water)
SOG
Position Display Chooses position display format. LAT/LON, TD LAT/LON
Time Display Chooses time notation. 12 hours, 24 hours 24 hours
Infrared Remote
Mode
A remote controller can be set exclusively
for use with a specific display unit, in the
case of multiple NavNet display units. For
further details see the Installation Manual.
A, B, C, D A
Range & Bearing
Mode
Chooses how to calculate range and bearing.
Rhumb Line: Straight line
drawn between two points on a
nautical chart.
Great Circle: Shortest course
between two points on the
surface of the earth.
Rhumb Line
Bearing Readout Chooses bearing display format for course, course
over ground and cursor bearing.
True, Magnetic
Magnetic
Magnetic
Variation
The magnetic variations for all areas of the earth
are preprogrammed into this unit. The
preprogrammed variation is accurate for most
instances, however you may wish to manually
enter a variation. For manual input, select Manual,
hit the EDIT soft key, enter value and hit the
ENTER soft key to finish. “AUTO” requires position
data.
Auto, Manual
Auto
Display Mode
(Monochrome
model)
Reverses background (black) and foreground
(white) colors.
Day, Night Day
*Select ETR to show water temperature/depth data fed from the network sounder, and then set the TEMP
and DEPTH CALIBRATION of the SENSOR SETUP in the SOUNDER SYSTEM SETUP menu.
174


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1722 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info