596219
15
Zoom out
Zoom in
Previous page
1/27
Next page
9
External buzzer (option)
The optional external buzzer provides a louder
alert when the guard alarm is violated.
External buzzer
Type: OP03-168
Code No.: 008-462-790
Name Type Code no. Qty
MJ-XH
connector
03-2022 (2-3P) 008-463-540 1
Buzzer
assy.
80-0641 008-462-800 1
1. Unfasten screws and connector nuts to
remove the rear cover from the display unit.
2. Place the rear cover on a workbench, out
side up. Remove the plastic hole cover from
the location shown in Figure 19 with a
Phillips screwdriver and a hammer.
Remove burrs from the hole with a fine file
or sandpaper.
3. Insert the MJ connector (supplied as
option) in the hole made at step 2 as shown
in Figure 17. And then fasten the connector
nut with 0.76-0.78 N
m torque.
4. Plug in the XH connector at the end of
above connector into J6 on the DU Board.
5. Fasten screws and connector nuts to
reassemble the display unit. Torque should
be between 0.76-0.78 N
m.
6. Fasten the buzzer near the display unit
(within 1 m) with two tapping screws (3X15
or 3X20; local supply).
7. Attach the connector from the external
buzzer to the MJ connector.
Connector nut
Display unit, rear cover
Connector gasket
MJ connector
XH connector
(to J6 on the DU Board)
Figure 17 Fixing MJ-XH connector assembly
60 mm
50 mm
2-φ3.5
Figure 18 External buzzer
J6 located at right
side of shield case
under the rear panel.
External Buzzer
Remove hole cover with Phillips
screwdriver and hammer.
Remove burrs from hole with
fine file or sandpaper. Attach
connector (supplied as option).
Figure 19 Display unit, rear view
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1712 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1712

Furuno 1712 User Manual - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info