596219
11
Zoom out
Zoom in
Previous page
1/36
Next page
3
2. OPERATION
2.1 Turning the Radar On/Off
The [POWER] key turns the radar on/off. When
turning on the power, the control panel lights
and the timer displays the time remaining for
warm up of the magnetron (the device which
transmits radar pulses), counting down from
1:00 to 0:00.
Quick Start
Provided that the radar was once in use with
the transmitter tube (magnetron) still warm,
you can turn on the radar into TRANSMIT
status without the one-minute stand-by.
If the power switch has been turned off by
mistake and you want to restart the radar
promptly do the following:
1. Press the [POWER] key not later than five
seconds after power-off.
2. After ST-BY appears, press the [TX] key.
The radar is restored for full operation.
2.2 Transmitting, Stand-by
After the power is turned on and the magnetron
has warmed up, ST-BY (Stand-By) appears at
the screen center, indicating the radar is ready
to transmit radar pulses.
Press the [TX] key to transmit. Echoes appear
in four levels of digitized video according to
echo strength. Note that when a target is
beneath a marker (VRM, EBL, heading line and
range ring) the part of the marker where the
target lies is displayed in reverse video.
Note: If you press the [TX] key before the
indication ST-BY appears, the buzzer sounds
and the radar does not transmit pulses.
When you won’t be using the radar for an
extended period, but you want to keep it in a
state of readiness, press the [TX] key to set the
radar in stand-by. It is recommended to set the
radar in stand-by when it is not in use to extend
the life of the magnetron.
2.3 LCD Tone and Brilliance
1. Press the [TONE] key. The dialog box shown
in Figure 2-1 appears.
TONE: 12
LOW HIGH
BRILL: 3
LOW HIGH
Figure 2-1 Dialog box for adjustment of
LCD tone and brilliance
2. Press
or to adjust tone (0-27); or
to adjust brilliance (0-9).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno 1712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno 1712 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno 1712

Furuno 1712 Installation Guide - English - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info