68173

Funkwerk CS410 Manual

47
Zoom out
Zoom in
Previous page
1/103
Next page
·
No other keys may be configured between connection keys.
·
The number of possible connections depends on the number of connection keys that are configu
-
red. Iffewer than four (4) keys are configured, the functions Call waiting and Inquiry call areonly
available in a limited scope.
·
If several connections are »Idle«, the call signaled first is picked up when the handset is lifted.
·
If several connection keys are available, the corresponding connection key can be used to select
the call to be picked up when severalcalls are waiting. Note here however that only one ISDN sys
-
tem telephone should be operated at the ISDN port, and that only simple call waiting is configu
-
red. Only then is it possible to give preference to a second waiting call over an ongoing call (both
callers require one B channel each).
·
If a call is now signaled, a further connectioncan be set up without lifting the handset using a furt
-
her connection key.
·
Broker’s calls can be executed using the connection keys.
·
Allocation of a connection, or of a call, is retained until the call or connectionis ended, in contrast
to the softkeys »Connection 1..«.
·
A connection can be set up using a connection key and then pressing a line key.
·
During an ongoing call it is possible to set up a further connection by pressing the connectionkey.
·
Pressing the terminating key discontinues the current connection and the connection with the
last call that was on hold.
·
If you wish to connect an ongoing call with one that is on hold you must click the softkey »Trans-
fer« and then press the connection key for the call that is on hold.
»System-parked inquiry« button
The called subscriber uses the system-parked inquiriy call feature to dial the default numeric code. The telephone is
now available for other uses, for example an announcement or message. A different subscriber can accept the call
when he/she lifts the handset and dials the corresponding number for the call on hold. The code numbers given by
thePABX system canalso be entered in the function keysfor oneor several systemtelephones. Ifa callis placed in the
Parked inquiry queue by pressing a function key, this is indicated by the LEDs of the function keys flashing at the
system telephones configured for this feature. The call can be picked up by pressing the corresponding function key.
This performance feature is possible when only one call is on hold.
Team keys
A team key is a normal line key to which the internal number for a team is assigned. When the corresponding key is
pressed hands-free calling is activated and the listed team called.
If a call for the listed team is signaled you can accept the call by pressing the team key.
Team log-on/off
If you are entered as a subscriber in the call switching modes of one or more teams you can configure a key so as to
controlthecallsignaling of yourtelephone. Whenyou are logged in,teamcalls will besignaledat your telephone. No
team calls are signaled at your phone if you are not logged in.
Day/ Night modes
You can configure a key so that you can switch between the call switching modes of the PABX (Day/Night modes)
when that key is pressed. The pabx uses call modes for signaling team or door terminal calls, for example.
Announcement (see page 20)
Message enable on/off
You can also explicitly inhibit or enable receiving of messages using a corresponding function key.
Function keys System telephony
43
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info