68173

Funkwerk CS410 Manual

30
Zoom out
Zoom in
Previous page
1/103
Next page
Telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page through the
directory using the arrow buttons, or enter the specific first letter(s) of the name using the push-button set.
Information:
If the name of the caller is to be shown in the display instead of the caller’s number, this number must be entered in
the telephone directory with that name. The telephone number must be stored with the area code and with the line
access digit when using with a PABX system.
Displayof the callernameis only madewhenthe transmittednumbercorrespondsto the numberstoredinthe pho
-
ne directory.
If the telephone is disconnected from the ISDN network and then reconnected, or if the data for the telephone
directory are transferred to the system telephone via the PC program, the directory must be reorganized internally.
This process takes place automatically and may require a few minutes. During this time, the telephone directory of
your telephone is not available for use.
Settings for telephone book entries
Name and number
Each telephone book entry consists of a name (20 characters max. ) and a number (26 digits max. ). The assignments
for the keypad for entering letters, digits and special characters are described on page 12.
Outgoing number (MSN assignment)
You can assign a number (»MSN-1«…»MSN-10«) to each entry (MSN) that is to be transferred to the party being
called for outgoing calls. To set up a connection with this MSN prefix first dial the number in the telephone directory
incallpreparation and then liftup the handsetofyour phone. Ifyouestablish a connection usinganMSNassignment
key the number (MSN) for this key is displayed at the party you are calling.
To define the number(»MSN-1« ...»MSN-10«), that is to be displayed at the party being called, use the telephone
directory program on the WIN-Tools CD. If you do not assign a number to an entry, or assign an incorrect number
(one that is not in the phone directory), the first number entered for the telephone is transferred (»MSN-1«).
Special dial tone
You can program a special dial tone and for each entry and set the volume separately. A call is signaled using the set
special ringing tone when the caller also transmits the corresponding number. This special ringing tone will then
have priority over the ringing tone assigned to the selected MSN.
Infotext
You can store an info text for each entry. The information text is displayed when:
·
a telephone directory entry had been selected in call preparation usingthe OK key.
·
when a call is signaled and the softkey »Info« is pressed.
·
During a connection whenthe softkey »Display« is pressed.
The info text length is restricted to 42 characters. The assignments for the keypad for entering letters, digits and
special characters are described on page 12.
Telephone operation Telephone directory
26
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funkwerk CS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funkwerk CS410 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info