612077
63
Zoom out
Zoom in
Previous page
1/72
Next page
63
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Press [REC] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
When the unit reaches the specified time, it will be turned off
automatically.
To change the recording length during One-touch Timer
Recording, press [REC] repeatedly until desired length
appears.
To cancel One-touch Timer Recording within the specified
time, press [STOP C].
Note
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
If VCR One-touch Timer Recording is completed during
DVD playback or recording, the VCR will be in stop mode
and the DVD keeps the current mode.
You cannot use the pause function during One-touch Timer
Recording.
When One-touch Timer Recording is finished and the power
is turned off, the unit will switch to the timer-standby mode
automatically if a timer recording has been programmed.
Press [TIMER SET] to cancel the timer-standby mode in
order to use the unit continuously.
5 Press [STOP C] when the recording is
completed.
To prevent accidental recording on a recorded cassette,
remove its record tab. To record on it later, cover the hole with
cellophane tape.
This function helps you to dub the contents in the DVC (digital
video camcorder) to VCR.
Insert a recordable videotape.
Make sure your DVC is in video mode.
1 Press [AUX G \ H] repeatedly to select
DV(AV3).
2 Select the recording speed using [REC SPEED].
(See page 62.)
3 Stop or pause the DVC where you want to start
dubbing.
4 Play back the DVC.
5 Press [REC].
The dubbing will start.
Note
Dubbing will start from where the tape is stopped.
Search
1 Press [SEARCH] so that the index search menu
appears.
2 Enter the number of recordings you want to
skip using [the Number buttons] within 30
seconds.
3 Press [FWD D] or [REV E] to start index
search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press [REV E].
After index search, the VCR will play back the tape
automatically.
Note
This function is not available during recording.
Every time a tape is recorded, an index mark is written on
the tape.
You can make the index mark up to 20.
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you want to skip in order to
reach the point.
1 Press [SEARCH] repeatedly until the time
search menu appears.
2 Enter your desired time to skip using
[the Number buttons] within 30 seconds.
3 Press [FWD D] or [REV E] to start time
search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press [REV E].
After index search, the unit will play back the tape
automatically.
Note
This function is not available during recording.
Press [STOP C] to stop the search.
If the tape reaches the end during the search, this unit will
cancel it and rewind the tape.
You can set the time up to 9:59 (9h. 59min.).
One-touch Timer Recording:
Prevent accidental erasure
DVC to VCR Dubbing
Preparing for DV dubbing (DVC to VCR):
0:30
8:00 7:30
1:00
Normal Recording
Record tab
VCRVCR
Index Search
Time Search
VCRVCR
VCRVCR
E9RF0FH_EN.book Page 63 Friday, May 16, 2014 7:17 PM
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai WL6D-M102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai WL6D-M102 in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WL6D-M102

Funai WL6D-M102 User Manual - Dutch - 85 pages

Funai WL6D-M102 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info