503729
20
Zoom out
Zoom in
Previous page
1/84
Next page
20
EN
Initial Setting
When you turn on this unit for the first time, you need to follow
these steps.
1 Press [STANDBY-ON Q].
2 Turn the TV on. Select the input to which the
unit is connected.
“Initial Setting” will automatically appear.
3 Select your desired language for the OSD using
[K \ L]. Then press [ENTER\OK] to go to the
next step.
4 Select your desired country for receiving your
local channels properly using [K \ L]. Then
press [ENTER\OK] to go to the next step.
This setting is mainly for digital channels.
Digital channels cannot be received properly for the
countries not listed above.
In such case, select “Other”.
5 Select your desired tuning type according to
your area using [K \ L], then press
[ENTER\OK].
The unit will start getting channels available in your area.
Digital tuning:
Only the DVB channels receivable in your area are
automatically scanned and memorised.
Digital & Analog tuning:
Both analogue and DVB channels receivable in your area
are scanned and memorised automatically.
Analog tuning:
Only the analogue channels receivable in your area are
automatically scanned and memorised.
If no channel has been memorised, the antenna
confirmation display will appear. Press [ENTER\OK] to start
auto scanning again or press [RETURN\BACK] to cancel
the initial settings.
6 After finishing channel setting, “Clock Setting”
will appear.
The current date and time will appear automatically.
If the current date and time are correct, press
[RETURN\BACK]
to exit, if they are incorrect, press
[ENTER\OK]
and follow to “
A
Clock Setting” on
page 68
.
7 After finishing “Clock Setting”, a confirmation
message for “Advanced Setting” will appear.
If you wish to proceed with “Advanced Setting”, select “Yes”
using
[K \ L], then press [ENTER\OK].
If you wish to skip this setting, select “No” using
[K \ L],then
press [ENTER\OK] to exit.
8 Select your desired option using [K \ L], then
press [ENTER\OK].
Caution
The default setting of “Antenna Out” is “OFF”.
When “Antenna Out” is set to “OFF” and this unit is in
standby mode, this unit does not send out TV signals to
the TV to save energy consumption. If you wish to
watch TV while this unit is in standby mode, set
“Antenna Out” to “ON”.
Note
After “Initial Setting”, if you need to unplug the mains cable,
make sure to turn off the power first and leave it in standby
mode for at least 1 minute before attempting to unplug.
Otherwise, it may cause data loss.
If you want to set each item of “Initial Setting” again, you can
set them at “General Setting”.
Refer to “A OSD Language (Default: English)” on page 66.
Refer to “Country Setting” on page 23.
Refer to “Auto Tuning (DVB & ANALOG)” on page 21.
Refer to “Auto Tuning (ANALOG)” on page 21.
Refer to “Auto Tuning (DVB)” on pages 23.
Refer to “Clock” on page 68.
Basic Setup / TV View Operation
OSD Language
English
Áúëãàðñêè
Èesky
Français
Deutsch
Magyar
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
Auto Tuning
Make sure the antenna is
connected to “ANTENNA IN” jack.
Digital tuning
Digital & Analog tuning
Analog tuning
0 : 00
01 / 01 / 2013 (TUE)
Clock Setting
In advanced setting, you can set up
a category related to power consumption.
Do you want to proceed Advanced Setting?
Yes
No
Antenna Out
ON
OFF
20


Need help? Post your question in this forum.

Forumrules
1

Forum

funai-wd6d-m101

Reset search

  • Can this machine be connected to a Mac computer presumably via the USB port Submitted on 27-4-2023 at 13:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai WD6D-M101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai WD6D-M101 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai WD6D-M101

Funai WD6D-M101 User Manual - German - 84 pages

Funai WD6D-M101 User Manual - Dutch - 85 pages

Funai WD6D-M101 User Manual - Italian - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info