612076
79
Zoom out
Zoom in
Previous page
1/84
Next page
79
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
PLAYBACK
GENERAL
TV aspect ratio does not match your
TV screen.
Check “TV Aspect” setting. (See page 71.)
A different aspect ratio will be used when the aspect ratio specified by the disc
is not supported by this unit.
Playback picture is distorted.
Colour of the picture is abnormal.
During fast forward or fast reverse, playback picture may be distorted. This is
not a malfunction.
Connect to TV directly. When you connect this unit with the television via VCR
or other devices, the picture may be distorted due to the copy-protection signal.
Check if the cables are damaged.
Keep the equipment which may cause electrical disturbances, such as a cellular
phone, away.
There is no sound, or no subtitle. • Turn on all connected devices.
Check if the external input channel is set correctly.
Check if the connections are made securely and correctly.
If using the HDMI connection, sound is not output when “HDMI Audio” is set to
“OFF”.
Check the RCA audio cable connection. If you are using HDMI-DVI conversion
cable, you must connect the RCA audio cable, too.
If using the HDMI connection, check whether the output format of this unit
(HDMI FORMAT) matches the supported input format of other connected
device.
HDD/DVD
Playback does not start from the
beginning.
Resume function may be activated. Refer to page 51 to cancel the resume
point.
HDD
HDD playback suddenly stops. When DVD recording finishes during HDD playback, the unit will stop the HDD
playback, and start writing data to the DVD. This is not a malfunction.
DVD
Playback cannot be performed. • Check if the playable disc is inserted.
Check if the disc is loaded correctly with the labelled side facing up.
Discs made on other devices or on personal computers cannot be played back
on this unit unless it is finalised on the device.
Even if it is finalised, the performance of those discs are not guaranteed on this
unit.
The disc may be dirty or flawed. Clean the disc.
Check if all the connections are made correctly.
Check “Parental Lock” setting. (See page 68.)
Playback of DVD is prohibited from 2 minutes before the programmed start time
of a timer recording when the recording media is DVD.
There is no sound, or no subtitle. • Check if all the connections are made correctly.
Check if the “Audio Out” is set correctly. (See pages 68-69.)
There is a possibility that the selected subtitle language is not supported by the
disc.
Digital audio setting cannot be
changed to main audio (L), sub
audio (R) or combination of both.
If the audio source is in the Dolby Digital format, set “Dolby Digital” setting to
“PCM” in “Playback” menu. (available only for DVD) (See page 69.)
Audio language or the subtitle
language of the DVD cannot be
changed.
Multilingual subtitles are not supported by the disc.
Some audio languages or the subtitle languages can be changed only from the
disc menu. Please refer to the disc’s manual.
Angles cannot be changed. Even though the multi-angle feature is supported by the disc, that does not
mean all the scenes are shot from multi-angles. Changing angles is available
only for those scenes shot from the multi-angle.
The disc cannot be played back on
other player even though it is
finalised properly.
Some DVD players do not play back the disc made on other recorder. Refer to
the manual of the unit.
VCR
Picture noise appears. Adjust tracking control for better picture by pressing [PROG. G\H] while you
are playing back a videotape.
Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING” on page 4.
The unit does not play back the
videotape.
Check if a videotape is in this unit.
The motor rotates even when
playback / recording is stopped.
The motor may rotate for the duration of approximately 5 minutes for efficient
operation. This is not a malfunction.
Symptom Remedy
E3TF0ED_EN.book Page 79 Wednesday, March 17, 2010 11:20 AM
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai TD6D-M100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai TD6D-M100 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai TD6D-M100

Funai TD6D-M100 User Manual - German - 88 pages

Funai TD6D-M100 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info