612076
72
Zoom out
Zoom in
Previous page
1/84
Next page
72
EN
This unit receives time signals from the analogue / DVB
channels, and set the clock automatically. Set the channel
tuning before setting Auto Clock.
1 Select “ON” using [K \ L], then press
[ENTER\OK].
2 Press [SETUP] to exit.
3 Press [STANDBY-ON Q] to turn the unit off.
The Auto clock function is activated.
This unit will search for the time every time when the
power is turned off.
Leave the unit off for about 10 seconds to give it time
to set the clock.
Note
If you want to cancel “Auto Clock Setting”, select “OFF”
using [K \ L], and then press [ENTER\OK] at step
1.
If “Auto Clock Setting” is “OFF”, “Timer Recording
(EPG)” may not be able to perform.
The clock may set itself automatically after you connect
the antenna cable to the unit and plug in the mains
cable. In this case, the current time will appear on the
front panel display.
If there are only analogue channels memorised in this
unit:
- The channel assigned to “analogue / 1Ch” must
receive the PDC signal in order to set the clock
automatically.
- The unit will correct the current time by receiving PDC
broadcasts whenever the power is turned off.
- Between 23:00 and 1:00, the Auto Clock function will
not operate even when the power is turned off.
The clock cannot be set automatically if you cannot
receive a channel in your area that carries a time signal.
In this case, set the clock manually.
The unit will also correct the current time automatically
at 8:00 and 1:10 if the unit is in standby mode or if you
are watching DVB channel.
Setup A General Setting A DivX
Provides DivX
®
VOD registration code and deactivation
code.
Refer to page 49 for more details.
Set the DivX
®
subtitle.
Setup A General Setting A HDMI
Make sure that the HDMI cable is connected and the TV
input is set to HDMI.
You can select the colour space for HDMI output.
Set the appropriate colour space for your display device.
When the connected device is not compatible with the Y/
Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
If you do not want to output the audio through HDMI
(when you digitally output the audio through the DIGITAL
AUDIO OUT (COAXIAL) jack to your audio system, etc.),
you can set the HDMI audio output off.
Set to “OFF” when the HDMI sound is not required.
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Select “Enhanced” if the black-white contrast is not
clear.
This setting is effective only for HDMI RGB output.
B Auto Clock Setting (Default: ON)
DivX
®
A DivX® VOD
Auto Clock Setting
ON
OFF
A
B
DivX Subtitle
DivX® VOD
B DivX Subtitle (Default: OFF)
HDMI
A Format (Default: RGB)
B HDMI Audio (Default: ON)
C RGB Range (Default: Normal)
DivX Subtitle
OFF
English
Czech
Dutch
French
German
Hungarian
Italian
A
B
C
Format
HDMI
udio
RGB Ran
A
ge
Format
RGB
YCbCr
HDMI Audio
ON
OFF
RGB Range
Normal
Enhanced
E3TF0ED_EN.book Page 72 Wednesday, March 17, 2010 11:20 AM
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai TD6D-M100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai TD6D-M100 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai TD6D-M100

Funai TD6D-M100 User Manual - German - 88 pages

Funai TD6D-M100 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info