503726
70
Zoom out
Zoom in
Previous page
1/84
Next page
70
EN
Note
You can also change or switch off the subtitles on a DVD
from the disc menu if it is available.
•Press [CLEAR] or [0] to erase numbers entered
incorrectly.
You can only select the languages supported by the
inserted disc.
Set to “ON” to show the angle icon during the playback.
Note
An individual picture on TV screen is called as Frame,
which consists of two separate images called as Field.
Some pictures may be blurred at the “Auto” setting in still
mode due to their data characteristics.
Assign [VARIABLE SKIPP] or
[VARIABLE REPLAYO] to skip or rewind by a certain
amount of time when they are pressed.
Refer to the explanations below and set the selected item.
A: Variable Skip (Default: 30 seconds)
Sets the amount of skip time for [VARIABLE SKIPP].
B: Variable Replay (Default: 30 seconds)
Sets the amount of rewind time for
[VARIABLE REPLAYO].
Note
With discs recorded using the PAL system, a PAL signal
is output for viewing on a PAL system TV.
Discs recorded with the PAL system cannot be viewed
on an NTSC system TV.
With discs recorded using the NTSC system, an NTSC
signal is output for viewing on an NTSC or Multi system
TV.
With discs recorded using the NTSC system, select PAL
to view on a PAL system TV.
Setup A General Setting A Display
Set the OSD language.
Set the screen saver time delay.
Set the front panel display brightness.
Note
The display will not light up when the unit is in standby
mode.
This is a Power Saving mode (ECO) for standby.
F Angle Icon (Default: ON) (DVD only)
G Still Mode (Default: Auto) (DVD only)
Auto : Automatically select the best resolution setting
(“Frame” or “Field”) based on the data
characteristics of the pictures.
Field : Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the limited
amount of data.
Frame : Select “Frame” to display relatively motionless
pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilise
the pictures due to simultaneous output of two
Field data.
H Variable Skip/Replay
Angle Icon
ON
OFF
Still Mode
Auto
Field
Frame
A
B
Variable Skip
Variable Replay
Variable Skip/Replay
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
I TV System (Default: PAL) (DVD only)
PAL : Outputs a modified PAL signal for viewing discs
recorded with the NTSC system on a PAL system
TV.
Auto : Changes the video system (PAL / NTSC)
automatically according to the format of the
inserted disc.
Display
A OSD Language (Default: English)
B Screen Saver (Default: 10 minutes)
C FL Dimmer (Default: Bright)
TV System
PAL
Auto
A
B
C
OSD Language
Screen Saver
FL Dimmer
OSD Language
Áúëãàðñêè
English
Èesky
Français
Deutsch
Magyar
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Bright
Dark
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai TD6D-D500GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai TD6D-D500GB in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai TD6D-D500GB

Funai TD6D-D500GB User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info