503726
32
Zoom out
Zoom in
Previous page
1/84
Next page
32
EN
Note
“PCM” stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing audio
data.
When the recording speed is set at other than XP, the unit
records “Dolby Digital” audio automatically even if you
selected “PCM”.
Basic Recording and One-touch Timer
Recording (OTR)
Follow the steps below to record a TV programme.
(See page 74 for VCR recording.)
1 Press [STANDBY-ON Q] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
If you want to record to the HDD, press [HDD], then
proceed to step
5.
If you want to record to a disc, press [DVD].
2 Press [OPEN\CLOSE EJECT A] to open the
disc tray.
3 Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
4 Press [OPEN\CLOSE EJECT A] to close the
disc tray.
5 Select the recording speed using [REC SPEED].
(See page 28.)
6 Press [INPUT SELECT] to select DVB, analogue
or external input mode, then select the desired
channel to record using [PROG. G\H] or
[the Number buttons].
Press [REC] to start recording.
The “I HDD” or “I DVD” mark will be displayed on the TV
screen briefly.
To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC] again to restart the recording.
This is a simple way to set the recording time in blocks of
30 minutes. Check that the disc you are recording onto
has enough space remaining for the time you set. (See
page 74 for VCR recording.)
Press [REC] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
When the unit reaches the specified time, it will be
turned off automatically.
To change the recording length during One-touch Timer
Recording, press [REC] repeatedly until the desired
length appears.
To cancel One-touch Timer Recording within the
specified time, press [STOP C].
8 Press [STOP C] to stop the recording.
This operation may take a few moments to complete.
Note
You can change the channel while in the REC pause mode.
Recording continues until the disc is full (as for HDD, 12
hours after the recording starts) or you stop the recording.
You cannot change the recording speed in the REC or REC
pause mode.
Even if the broadcasting you are recording is in the SECAM
system, this unit automatically converts it to the PAL system
when recording.
You can play back a title on one component while making a
recording on the other component. To do so, simply select
the component (HDD or DVD) you want to use for the
playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.
If playback and recording are operated in each component
(HDD or DVD) at the same time, select the component you
want to operate first, and then press [PAUSE F] or
[STOP C].
NTSC recording is prohibited in this unit.
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
The remaining recording time will be displayed on the front
panel display during One-touch Timer Recording.
Unlike the timer recording, you can perform the following
operations during One-touch Timer Recording.
- Turn off the power. (One-touch timer recording will be
cancelled.)
-Use [REC] or [STOP C] on the remote control.
You cannot use the pause function during One-touch Timer
Recording.
The unit will be turned off automatically under the following
conditions.
- No space remains on the disc.
- If a power failure occurs.
DVB ANALOG
7 Basic Recording:
HDDHDD
D VD-RWD VD-RW
Video
D VD-RW
D VD-RW
D VD-RW
VR
D VD-R
D VD-R
D VD-R
Disc tray guide
One-touch Timer Recording (OTR):
0:30
8:00 7:30
1:00
Normal
Recording
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai TD6D-D500GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai TD6D-D500GB in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai TD6D-D500GB

Funai TD6D-D500GB User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info